zaxon Posted February 28, 2012 Share Posted February 28, 2012 Great job, quick test on real hardware: http://www.youtube.com/watch?v=gys8t9UEsoQ Quote Link to comment Share on other sites More sharing options...
Roydea6 Posted February 28, 2012 Share Posted February 28, 2012 Great job, quick test on real hardware: Great!!! Is this for the hardware SIDE or MYIDE> if for SIDE please post mine as I would like to try this new set up. Quote Link to comment Share on other sites More sharing options...
zaxon Posted February 28, 2012 Share Posted February 28, 2012 It is run on my real atari and real SIDE , all is ok ,only image loader don't load all. I hope it is on list to do... Quote Link to comment Share on other sites More sharing options...
mr-atari Posted February 28, 2012 Share Posted February 28, 2012 Great job, quick test on real hardware: Great!!! Is this for the hardware SIDE or MYIDE> if for SIDE please post mine as I would like to try this new set up. The version here on atariage is for SIDE-hardware. There are also versions for MyIDE (internal and external etc) found on the atarimax-forum. The problem with the image-loader is the same as for all loaders, if it overwrite the source it's a gonner And programs that use OS-ram won't run (there resides the MyBIOS-F), here the only solution is a ROM-version.... Later! Quote Link to comment Share on other sites More sharing options...
candle Posted November 17, 2012 Author Share Posted November 17, 2012 major update currently, there is only side version, as most of the work was done for side ultimate1mb working in tandem what one need to fully test it is: - ultimate1mb from the second run - a way of flashing new firmware into ultimate1mb (this will add pbi driver) - cf card with both APT and FAT32 partition as for myide users, i still do builds for myide interfaces, but major feature that was added, and i really want to get checked by wider audience - that is ATR booting right from FAT32 partition - is not available for them anyways once i've iron things out, i'll make them public as for myide2 interface - i haven't seen any hardware specs on how registers are mapped, so, well... if anyone claims that side loader supports it, its either because hardware stayed the same, or it was simply patched to work without any premissions from my side at all enjoy, Sebastian fat32-side.xex U1MB_current.zip Quote Link to comment Share on other sites More sharing options...
AtariGeezer Posted November 17, 2012 Share Posted November 17, 2012 Does the Jed and ROM of the SIDE cart need to be updated for this to work? My SIDE's were from the first batch that Piotr made... I flashed my 800xl and 130XE with the new ROM, but the ATR mounting isn't working. Both U1MB's have the second run Jed, but when I mount an ATR by either Space-Bar or Return, it just boots to Basic. Also, on NTSC monitors, the scrolling message only shows the upper pixels. Any ideas? Quote Link to comment Share on other sites More sharing options...
Roydea6 Posted November 17, 2012 Share Posted November 17, 2012 After selecting SIDE atr and pressing spacebar to select D1: then press Enter key maching reboots to Self Test.. If both side and ultimate SDX enabled Ultimate rom loads. Quote Link to comment Share on other sites More sharing options...
candle Posted November 17, 2012 Author Share Posted November 17, 2012 SIDE has to work in loader mode (switch) and u1mb has to have option "SIDE hardware" set to "On, with button" CF card has to have both APT and FAT32 partition, otherwise SIDE loader will see partition allright, but PBI driver won't Quote Link to comment Share on other sites More sharing options...
AtariGeezer Posted November 17, 2012 Share Posted November 17, 2012 I totally missed that part in the menu But after I reload the U1MB's JED, I'm sure it will work... Thanks again for the help Quote Link to comment Share on other sites More sharing options...
mimo Posted November 17, 2012 Share Posted November 17, 2012 Dummy question, is there a step by step guide how to load atr from side partition, does it involve sdx? Cus if it does I am screwed. Quote Link to comment Share on other sites More sharing options...
candle Posted November 17, 2012 Author Share Posted November 17, 2012 it does not if you run it, instruction will scroll Quote Link to comment Share on other sites More sharing options...
+Philsan Posted November 17, 2012 Share Posted November 17, 2012 When I turn on SIDE cart, old loader appears. To have the new one I need to run fat32-side.xex. Is there a way to flash SIDE cart with new loader? Quote Link to comment Share on other sites More sharing options...
candle Posted November 17, 2012 Author Share Posted November 17, 2012 not at this moment first i need to have some feedback Quote Link to comment Share on other sites More sharing options...
venom4728a Posted November 17, 2012 Share Posted November 17, 2012 Has a JED file been released to upgrade first run U1mb to make them the same as 2nd run? Best Regards Robert Quote Link to comment Share on other sites More sharing options...
candle Posted November 17, 2012 Author Share Posted November 17, 2012 yes, it was, at the day of u1mb v2 shipments... http://spiflash.org/atari/ultimate1mb-v2.jed Quote Link to comment Share on other sites More sharing options...
Jacques Posted November 17, 2012 Share Posted November 17, 2012 Tested new version of loader, but not together with Ultimate, though. Binaries are loaded, STM1 mouse @ port2 doesn't cause a mess anymore, thanks Candle Quote Link to comment Share on other sites More sharing options...
St(r)yker Posted November 17, 2012 Share Posted November 17, 2012 http://www.youtube.com/watch?v=UMeppGd9SNw 1 Quote Link to comment Share on other sites More sharing options...
AtariGeezer Posted November 18, 2012 Share Posted November 18, 2012 After updating the JED, it now works Quote Link to comment Share on other sites More sharing options...
MEtalGuy66 Posted November 25, 2012 Share Posted November 25, 2012 Where is the latest version to be flashed into the SIDE cart? Quote Link to comment Share on other sites More sharing options...
Frankie Posted November 26, 2012 Share Posted November 26, 2012 yes, it was, at the day of u1mb v2 shipments... http://spiflash.org/...imate1mb-v2.jed Is there a fools guide to using this jed file to update your u1mb v1? Frank Quote Link to comment Share on other sites More sharing options...
candle Posted November 26, 2012 Author Share Posted November 26, 2012 if Jon (FJC) changed the photo and updated the pdf there is, but Jon should answer this one i'm incompetent to write any fools guides i'm affride Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted November 26, 2012 Share Posted November 26, 2012 if Jon (FJC) changed the photo and updated the pdf there is, but Jon should answer this one Remind me what needs changing, Sebastian. My mind-reading capabilities have been rusty of late. Quote Link to comment Share on other sites More sharing options...
Louis Posted November 28, 2012 Share Posted November 28, 2012 major update ... as for myide users, i still do builds for myide interfaces, but major feature that was added, and i really want to get checked by wider audience - that is ATR booting right from FAT32 partition - is not available for them anyways once i've iron things out, i'll make them public.... I'm using ( I think) the latest version for MyIDE, but the selection is often wrong. When I select a program, it is really selecting another program. Did you have a new SIDE Loader for MyIDE ready? That would be great! thanks in advance. Louis Quote Link to comment Share on other sites More sharing options...
candle Posted November 29, 2012 Author Share Posted November 29, 2012 all loaders are build simultanously, but myide version would display random data in status line (normally it reads clock and date from SIDE real-time clock chip) i could post them here, but i'm really looking forward for ANY feedback from u1mb/side users first Sebastian Quote Link to comment Share on other sites More sharing options...
Louis Posted December 1, 2012 Share Posted December 1, 2012 I really wish I had a SIDE, so I can test it I have ordered one from Lotharek. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.