panamajoe Posted February 11, 2012 Share Posted February 11, 2012 I must be doing something stupid, but i can`t get into the Atari setup program for the Sio2Sd anymore since i updated to the new firmware 3.1. Before that i simply took out the SD card and the Sio2Sd automatically loaded the Atari file manager thing. But now: nothing... any ideas? Quote Link to comment Share on other sites More sharing options...
w1k Posted February 11, 2012 Share Posted February 11, 2012 sio2sd internal setup? push 2x SHIFT key "By opuścić Setup wciskami K3 albo dwukrotnie SHIFT." Quote Link to comment Share on other sites More sharing options...
panamajoe Posted February 11, 2012 Author Share Posted February 11, 2012 No, i meant the Configurator (where you can browse the disk images und mount them)... I found a (somewhat awkward) solution: - put sio2sdv35.xex on the SD cart - mount it as a Virtual Disk (nr. 1) - press "1" on the Sio2SD while starting up (so it loads the virtual disk as "D1:") => voila: the Configurator is there is there a more elegant solution? Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 11, 2012 Share Posted February 11, 2012 Downgrade to 2.5? Quote Link to comment Share on other sites More sharing options...
+Philsan Posted February 11, 2012 Share Posted February 11, 2012 Firmware v2.5 works perfectly. Authors are introducing a lot of nice features with 3.x beta firmwares but unfortunately they don't explain them in English! Quote Link to comment Share on other sites More sharing options...
w1k Posted February 11, 2012 Share Posted February 11, 2012 maybe this help (PL) 31.zip Quote Link to comment Share on other sites More sharing options...
pajero_pn Posted February 12, 2012 Share Posted February 12, 2012 (edited) The current version of the firmware is 3.1 RC_02 (This is only a test version. This is not the final version !!!) Bug fix: - LoaderXEX: fixed, spoiled bits of offset, and he lost $ ad57 bytes - LoaderXEX: start address of the first block is written to dosable RUNADR and DOSVEC - LoaderXEX: set $ 9 = 1 and $ 244 = 0 I'm sorry, my English is low SETUP and K1-K4 eng.pdf Edited February 12, 2012 by pajero_pn 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.