Christopher Senz Posted March 3, 2013 Share Posted March 3, 2013 I bought myself a PAL 600XL today at a flea market but it does not have a power supply. Where would I be able to buy one or failing that what can I do to use an american power supply without burning anything out? Quote Link to comment Share on other sites More sharing options...
mimo Posted March 3, 2013 Share Posted March 3, 2013 (edited) Where in the world are you? If you are in NTSC land you can use a us power supply without any modifications. If you are in pal land and have an NTSC power supply you will need a voltage dropping transformer. If you don't have any power supply available to you, you can make your own with a modern power supply that outputs 5volts dc at 1.5 amps or more and a 7 pin din plug. Or if you are in the USA, best electronics and myatari.com both have new ones available Edited March 3, 2013 by mimo Quote Link to comment Share on other sites More sharing options...
Christopher Senz Posted March 3, 2013 Author Share Posted March 3, 2013 I'm in Australia, thanks for the reply. Can you give me any more information on making my own power supply? Quote Link to comment Share on other sites More sharing options...
Sub(Function(:)) Posted March 3, 2013 Share Posted March 3, 2013 I'm in Australia, thanks for the reply. Can you give me any more information on making my own power supply? Sorry is this sounds cruel: But if you have to ask how to make a power supply. You should NOT be making one. You will have to connect the power supply to mains voltage. This can be VERY dangerous if you don't know what you are doing. If you really want to build one take an electronics course at your local community college. The Atari 600XL takes a 5V DC input at about 1Amp to 1.5Amps Quote Link to comment Share on other sites More sharing options...
Christopher Senz Posted March 3, 2013 Author Share Posted March 3, 2013 [quote name=Sub(Function()' timestamp='1362308326' post='2707985] Sorry is this sounds cruel: But if you have to ask how to make a power supply. You should NOT be making one. You will have to connect the power supply to mains voltage. This can be VERY dangerous if you don't know what you are doing. If you really want to build one take an electronics course at your local community college. The Atari 600XL takes a 5V DC input at about 1Amp to 1.5Amps Sound advice really. probably safer to get a transformer. Quote Link to comment Share on other sites More sharing options...
Sub(Function(:)) Posted March 3, 2013 Share Posted March 3, 2013 Sound advice really. probably safer to get a transformer. not just a transformer, but you will also need the regulation circuit... as a transformer will take AC input and give out AC. The XLs and XEs both that DC, and have no rectification (AC to DC convertion) built in. Quote Link to comment Share on other sites More sharing options...
mimo Posted March 3, 2013 Share Posted March 3, 2013 He means a voltage dropping transformer. And it's really not that difficult to cut the barrel connector off a wall wart and solder on a din connector or find someone who can do it for you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.