Pixelboy Posted February 20, 2015 Share Posted February 20, 2015 So, when will Eduardo make his next appearance at AtariAge? I'll guess April 17, 2015. Dude, don't get people's hopes up like that. 2 Quote Link to comment Share on other sites More sharing options...
san-d-2000 Posted February 20, 2015 Share Posted February 20, 2015 Would be cool if Ed outsourced the project, lots of capable people here, that way he would also have more time to focus on programming games and finish Donkey Kong. Quote Link to comment Share on other sites More sharing options...
opcode Posted February 20, 2015 Author Share Posted February 20, 2015 Second run update: - 24 SGMs will ship by March 6th. Waiting for PSGs - Remaining modules will ship in two months. I am contacting edge connector manufacturer about the special order. Connectors will be shipped directly to factory in China. I am using current rev to speed up manufacturing. PAL SCART will be dealt after that. 14 Quote Link to comment Share on other sites More sharing options...
Pixelboy Posted February 20, 2015 Share Posted February 20, 2015 Second run update: - 24 SGMs will ship by March 6th. Waiting for PSGs - Remaining modules will ship in two months. I am contacting edge connector manufacturer about the special order. Connectors will be shipped directly to factory in China. I am using current rev to speed up manufacturing. PAL SCART will be dealt after that. Nice update. That's really all people around here really want. If you're going to place a special order of female edge connectors, I wonder if other people would like to use this opportunity to order their own stash of these edge connectors. With a single order, the price per connector is bound to go down a little bit, not to mention the savings in shipping fees. Chances are these extra edge connectors will not be used for any project immediately, but they will be available once they are needed. So Eduardo, assuming there is interest in this, would you be interested in augmenting your order of female edge connectors? 4 Quote Link to comment Share on other sites More sharing options...
BILLYonaire Posted February 20, 2015 Share Posted February 20, 2015 Second run update: - 24 SGMs will ship by March 6th. Waiting for PSGs - Remaining modules will ship in two months. I am contacting edge connector manufacturer about the special order. Connectors will be shipped directly to factory in China. I am using current rev to speed up manufacturing. PAL SCART will be dealt after that. Thank you for the update, Eduardo. To be clear, will all remaining modules definitely ship in two months? Quote Link to comment Share on other sites More sharing options...
Tron Unit Posted February 20, 2015 Share Posted February 20, 2015 (edited) i dont kwow why he refuse help from people here to finish the project..... it's not like the sgm is a top secret project and the world will end if someone else order parts or put the 2 screew to close the case..... at least he could release the files to diy if people want to try... like the cvkeyboard or maybe he will sell the 150 sgm on ebay for big $$$ hope not Like most engineers and programmers, he probably feels like it's his baby and I believe he got licensing to make it from the holders of the Colecovision trademark (correct me if I'm wrong). As a licensor I would be pretty upset that he could not deliver a product and take the license elsewhere like to Collector Vision and have them produce them because it would only help boost sales of their SGM games. That would be a pretty good business move. Edited February 20, 2015 by Tron Unit Quote Link to comment Share on other sites More sharing options...
mufla Posted February 20, 2015 Share Posted February 20, 2015 Thanks Eduardo! Quote Link to comment Share on other sites More sharing options...
Rey Posted February 20, 2015 Share Posted February 20, 2015 Second run update: - 24 SGMs will ship by March 6th. Waiting for PSGs - Remaining modules will ship in two months. I am contacting edge connector manufacturer about the special order. Connectors will be shipped directly to factory in China. I am using current rev to speed up manufacturing. PAL SCART will be dealt after that. Thank you sir! Quote Link to comment Share on other sites More sharing options...
chart45 Posted February 21, 2015 Share Posted February 21, 2015 Like most engineers and programmers, he probably feels like it's his baby and I believe he got licensing to make it from the holders of the Colecovision trademark (correct me if I'm wrong). As a licensor I would be pretty upset that he could not deliver a product and take the license elsewhere like to Collector Vision and have them produce them because it would only help boost sales of their SGM games. That would be a pretty good business move. yes but when you are 2 years late and people ask you can i help you with shipping or assembly they dont ask to take over your project but anyway seems that everything will be done in 2 months go Ed go Quote Link to comment Share on other sites More sharing options...
mightywiz Posted February 21, 2015 Share Posted February 21, 2015 i'm glad we are getting updates. any is better then nothing at all. thanks ed! Quote Link to comment Share on other sites More sharing options...
chart45 Posted February 21, 2015 Share Posted February 21, 2015 Nice update. That's really all people around here really want. If you're going to place a special order of female edge connectors, I wonder if other people would like to use this opportunity to order their own stash of these edge connectors. With a single order, the price per connector is bound to go down a little bit, not to mention the savings in shipping fees. Chances are these extra edge connectors will not be used for any project immediately, but they will be available once they are needed. So Eduardo, assuming there is interest in this, would you be interested in augmenting your order of female edge connectors? those are good or not http://pages.ebay.com/link/?nav=item.view&alt=web&id=130970283933 Quote Link to comment Share on other sites More sharing options...
Pixelboy Posted February 21, 2015 Share Posted February 21, 2015 those are good or not http://pages.ebay.com/link/?nav=item.view&alt=web&id=130970283933 Well, the description says 60 pins (2 x 30 pins), but the pictures indicate 44 pins (2 x 22 pins) so based on that alone I'd be weary of buying from this seller. On the other hand, a lot of 100 such connectors at 72$ means 1.38$ per connector, which doesn't sound all that bad... 1 Quote Link to comment Share on other sites More sharing options...
+grips03 Posted February 21, 2015 Share Posted February 21, 2015 Well, the description says 60 pins (2 x 30 pins), but the pictures indicate 44 pins (2 x 22 pins) so based on that alone I'd be weary of buying from this seller. On the other hand, a lot of 100 such connectors at 72$ means 1.38$ per connector, which doesn't sound all that bad... SGM uses: EDAC p/n 395-060-559-201 395 = black with .1 pin spacing 060 = 60 pin (2x30) 559 = right angle (.15 row spacing) 201 = without mounting tabs Min order for EDAC is 25 if non stock part. 1 Quote Link to comment Share on other sites More sharing options...
colecovisionfanforever Posted February 23, 2015 Share Posted February 23, 2015 Second run update: - 24 SGMs will ship by March 6th. Waiting for PSGs - Remaining modules will ship in two months. I am contacting edge connector manufacturer about the special order. Connectors will be shipped directly to factory in China. I am using current rev to speed up manufacturing. PAL SCART will be dealt after that. Hi Eduardo, Great to hear your new update!! Hope you still remember that I`m using a French Colecovision scart version overhere.... Regards Quote Link to comment Share on other sites More sharing options...
scalpel Posted February 24, 2015 Share Posted February 24, 2015 (edited) Hi Eduardo, Great to hear your new update!! Hope you still remember that I`m using a French Colecovision scart version overhere.... Regards Héhé ! Yes, we are some here to wait the SGM for the French Scart version I paid for 2 there are a few months (money sent the 30th of October, 2012) ^^ The day I'll receive my 2 SGM, I will be very very happy Edited February 24, 2015 by scalpel Quote Link to comment Share on other sites More sharing options...
pongbeat Posted February 24, 2015 Share Posted February 24, 2015 Me too...I still waiting for the last set of 1st run and if it doesn't work on scat version i have some pal version. So... glad you are back Quote Link to comment Share on other sites More sharing options...
opcode Posted February 26, 2015 Author Share Posted February 26, 2015 Just contacted the first 17 buyers in my list. I have the modules ready to ship. 7 more should be ready next week, once the PSGs arrive. Also liquidating all assets of the old Opcode. Prototype games going to eBay. Printed material for unsold games available for grab in large batches. 3 Quote Link to comment Share on other sites More sharing options...
Rey Posted February 26, 2015 Share Posted February 26, 2015 Yes! Can't wait till you contact me. Great to see you around here Eduardo. Quote Link to comment Share on other sites More sharing options...
RelliK111 Posted February 26, 2015 Share Posted February 26, 2015 Cool I look forward to hearing from you Quote Link to comment Share on other sites More sharing options...
Pixelboy Posted February 26, 2015 Share Posted February 26, 2015 Also liquidating all assets of the old Opcode. Prototype games going to eBay. Printed material for unsold games available for grab in large batches. E-mail sent. Quote Link to comment Share on other sites More sharing options...
phattyboombatty Posted February 27, 2015 Share Posted February 27, 2015 Also liquidating all assets of the old Opcode. Prototype games going to eBay. Printed material for unsold games available for grab in large batches. Interested for sure! Email sent! Quote Link to comment Share on other sites More sharing options...
thevnaguy Posted February 27, 2015 Share Posted February 27, 2015 Is there a list somewhere that people can see where they are on being contacted and getting their modules? Quote Link to comment Share on other sites More sharing options...
Manoau2002 Posted February 27, 2015 Share Posted February 27, 2015 I gbot an email yesterday saying my SGM is ready to ship and asking for my address. Heres hoping. 1 Quote Link to comment Share on other sites More sharing options...
FibroFreak78 Posted February 27, 2015 Share Posted February 27, 2015 (edited) Waiting for my email. Would just like to know where I am on the list but I am glad things are moving in the right direction! Edited February 27, 2015 by FibroFreak78 Quote Link to comment Share on other sites More sharing options...
BILLYonaire Posted February 27, 2015 Share Posted February 27, 2015 I'm glad these are finally being produced. From the reviews I've seen, this will be worth the wait. Eduardo, please check your messages here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.