nathanallan Posted December 14, 2014 Share Posted December 14, 2014 I'll post them here, pics get hard to organize after a while. Here's one, digging and making more... Quote Link to comment Share on other sites More sharing options...
nathanallan Posted December 14, 2014 Share Posted December 14, 2014 That was the first proto, so it looks kinda rough. Not sure if this link will work... https://www.facebook.com/nathan.allan.10/media_set?set=a.10202726466031863.1505717430&type=3 Quote Link to comment Share on other sites More sharing options...
nathanallan Posted December 14, 2014 Share Posted December 14, 2014 Ok, I'll have to run both the TI shell and the Atari shell again, I can only find the t-handle and I am guessing the others went somewhere, as in bought off me. I definitely *did* make them, btu they're not around and have to comb through folders for the pics of them. Just a little embarassing! Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted December 14, 2014 Share Posted December 14, 2014 Should I send you the most recent STL files first, so that you will be making them from the most stable revision? Quote Link to comment Share on other sites More sharing options...
nathanallan Posted December 14, 2014 Share Posted December 14, 2014 PM sent. Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted December 15, 2014 Share Posted December 15, 2014 That was the first proto, so it looks kinda rough. Not sure if this link will work... https://www.facebook.com/nathan.allan.10/media_set?set=a.10202726466031863.1505717430&type=3 It does not seem to work. Plus I do not have a Facebook account. Could you post the photo in the thread? Quote Link to comment Share on other sites More sharing options...
Gazoo Posted December 15, 2014 Share Posted December 15, 2014 It does not seem to work. Plus I do not have a Facebook account. Could you post the photo in the thread? Facebook says: This content is currently unavailableThe page you requested cannot be displayed right now. It may be temporarily unavailable, the link you clicked on may have expired, or you may not have permission to view this page. Quote Link to comment Share on other sites More sharing options...
nathanallan Posted December 15, 2014 Share Posted December 15, 2014 Sure thing. Adding two pictures I did find to this post. Quote Link to comment Share on other sites More sharing options...
nathanallan Posted December 15, 2014 Share Posted December 15, 2014 Here are a couple few of the videos I made showing Atari related stuff. http://youtu.be/Tc9eOzihlNY?list=UUBL6V-y7s6XV1lxwIA5MzWQ http://youtu.be/LoGmLdKc8Ms?list=UUBL6V-y7s6XV1lxwIA5MzWQ http://youtu.be/M6vmPF-sGpk?list=UUBL6V-y7s6XV1lxwIA5MzWQ and of course a shameless plug to go see the rest of my videos Quote Link to comment Share on other sites More sharing options...
nathanallan Posted December 15, 2014 Share Posted December 15, 2014 Ok, found the TI cart prototype I made, pics attached. It's very rough but it was a one time prototype, and nobody wanted any, so I didn't develop much further. I made a cart design of my own (like it better( but left it since nobody wanted one. Er, nobody told me anything. 2 Quote Link to comment Share on other sites More sharing options...
+save2600 Posted December 15, 2014 Share Posted December 15, 2014 Especially now that the Supercarts are a reality, I'd think we'd want some new case alternatives to recycling used and sometimes abused shells. Quote Link to comment Share on other sites More sharing options...
+acadiel Posted December 15, 2014 Share Posted December 15, 2014 Yep, those are the older .STL files, unfortunately, Nathan - notice the thicker top part on the back of the cart. I posted some earlier in this thread, but can look and re-attach the correct ones, which Ksarul now has. It's the entire Inventor project, including the STL files. Quote Link to comment Share on other sites More sharing options...
nathanallan Posted December 15, 2014 Share Posted December 15, 2014 Got the .zip and they're in there.I can mod from here any thickness issues and make them easier to make overall. Snap top? Tool-less opening? Multi- board housing? Make it look like a part of the TI case? I can do these things. I see no need to stick to near original specs. Quote Link to comment Share on other sites More sharing options...
+acadiel Posted December 15, 2014 Share Posted December 15, 2014 Here is the last known one, with the mod to reinforce a part that was breaking off. Made at the TI Faire for Ksarul. tishellv2.6.zip Quote Link to comment Share on other sites More sharing options...
jens-eike Posted December 15, 2014 Share Posted December 15, 2014 Here is the last known one, with the mod to reinforce a part that was breaking off. Made at the TI Faire for Ksarul. Thanks for posting the new files - here is my test in clear ("natural") PLA on a Velleman K8200 (3Drag) printer using RepetierHost 1.0.6 and the Cura slicer: 3 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted February 3, 2015 Author Share Posted February 3, 2015 This is a cute little object someone made with their Makerbot... 5 Quote Link to comment Share on other sites More sharing options...
Tursi Posted February 3, 2015 Share Posted February 3, 2015 I'd buy a couple Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted February 11, 2015 Share Posted February 11, 2015 oh yes please, perfect for the keychain Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted February 11, 2015 Share Posted February 11, 2015 I'd buy a couple https://www.etsy.com/listing/215988592/mini-texas-instruments-ti-994a-3d?ref=shop_home_active_6 3 Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted February 11, 2015 Share Posted February 11, 2015 https://www.etsy.com/listing/215988592/mini-texas-instruments-ti-994a-3d?ref=shop_home_active_6 That keyboard looks just as usable! 2 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted February 12, 2015 Share Posted February 12, 2015 ...yes, I will check that Quote Link to comment Share on other sites More sharing options...
+acadiel Posted May 4, 2017 Share Posted May 4, 2017 Per some requests, I'm putting my cartridge repro up on Thingiverse for everyone to download. Right now, I'm still in "new user jail", but I'll publish it in 24 hours. I'm not sure if this will be the "final" URL, but it will wind up here (I think): http://www.thingiverse.com/thing:2296281 8 Quote Link to comment Share on other sites More sharing options...
nathanallan Posted May 5, 2017 Share Posted May 5, 2017 Per some requests, I'm putting my cartridge repro up on Thingiverse for everyone to download. Right now, I'm still in "new user jail", but I'll publish it in 24 hours. I'm not sure if this will be the "final" URL, but it will wind up here (I think): http://www.thingiverse.com/thing:2296281 I just tried, followed you as a maker but this wasn't published yet. Quote Link to comment Share on other sites More sharing options...
+acadiel Posted May 6, 2017 Share Posted May 6, 2017 I just tried, followed you as a maker but this wasn't published yet. Just published it this morning. Should be up there now. 4 Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted May 9, 2017 Share Posted May 9, 2017 thanks I'll give a print a try this week sometime! Greg Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.