jacobus Posted May 18, 2020 Share Posted May 18, 2020 (edited) 24 minutes ago, Stephen said: Holy shit-balls. Is that for real? That's the ugliest thing I have ever seen. Please don't tell me that turd just sat on top of the membrane kb underneath? It is rather nasty looking. ? And no, don't worry - it replaces the membrane keyboard altogether. Interestingly, I think the maroon key-tops are an option - the one I have is a slightly less hideous grey. Also note the "Tara" on the inverse key. Mr Fish pointed out, Inhome avoided using the Atari logo on their keyboard as well. Edited May 18, 2020 by jacobus 2 Quote Link to comment Share on other sites More sharing options...
Sugarland Posted May 18, 2020 Share Posted May 18, 2020 There's an ebay listing of two 400's right now, one with an all brown b-key. https://www.ebay.com/itm/2-x-Atari-400-computers-with-three-original-Hard-to-Find-boxes-TESTED-WORKING/333597356147 1 Quote Link to comment Share on other sites More sharing options...
+MrFish Posted May 19, 2020 Share Posted May 19, 2020 31 minutes ago, jacobus said: It is rather nasty looking. ? And no, don't worry - it replaces the membrane keyboard altogether. Interestingly, I think the maroon key-tops are an option - the one I have is a slightly less hideous grey. Also note the "Tara" on the inverse key. Mr Fish pointed out, Inhome avoided using the Atari logo on their keyboard as well. Yeah, looks a lot better without the red. But that thing really stands off the computer a lot. How does the keyboard itself feel/function? Quote Link to comment Share on other sites More sharing options...
xrbrevin Posted May 19, 2020 Share Posted May 19, 2020 the reason it is raised so much is to accommodate proper keyswitches altho i agree, it is an abomination to look at! Quote Link to comment Share on other sites More sharing options...
+slx Posted May 19, 2020 Share Posted May 19, 2020 People were still used to mechanical and even electrical typewriter keyboards which usually sat 2-4 inches above the desk (and offices still had proper lowered typewriter desks to allow for correct arm/elbow position when typing. So that keyboard looked far less raised in the 80s than it does now. Gesendet von iPhone mit Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
+MrFish Posted May 19, 2020 Share Posted May 19, 2020 I was thinking the same thing. It reminds me of some of the old mechanical typewriters. But it looks pretty odd in the modern era of computers, and even when compared to any Ataris or other computers of the day. Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted May 19, 2020 Share Posted May 19, 2020 (edited) some of these came with a bezel, some came with evil industrial metal fixtures that resembled electrical box moulding.... makes you wonder if they decided not to use all of the kit sometimes, although many came with nothing at all.... Edited May 19, 2020 by _The Doctor__ Quote Link to comment Share on other sites More sharing options...
Max_Chatsworth Posted July 7, 2020 Share Posted July 7, 2020 On 11/2/2013 at 8:37 PM, jacobus said: The first one is most certainly the "B Keyboard" from Inhome Software (Burlington, Ontario, Canada). It came in at least two versions and had replaceable keys so you could choose the single or multi-coloured look. Retail price was $150 (see receipt). if anyone wants a scan of the printed materials, please let me know. Image 1 shows the complete version 2 package with single colour keys. Image 2 shows the version 1 package with multi coloured keys along with an extra version 2 keyboard. Note the bag of extra brown key caps. I just got my hands on a 400...the first computer from my youth. Can I still get one of these from anyone? Quote Link to comment Share on other sites More sharing options...
mimo Posted July 8, 2020 Share Posted July 8, 2020 You could try myarari.com but you have to contact them through their eBay store now Quote Link to comment Share on other sites More sharing options...
doctorclu Posted October 30, 2020 Share Posted October 30, 2020 This has been a fun thread. My original 400 was eventually upgraded with a 1200 keyboard in one of the Radio Shack keyboard kits they sold. But for the record, while the keyboard is nothing close to a touch type keyboard, the 400 was a great keyboard for a low cost game machine and my first computer. 1 Quote Link to comment Share on other sites More sharing options...
drpeter Posted November 1, 2020 Share Posted November 1, 2020 I need a replacement keycap (ideally a '1') for a B-Key keyboard. Anyone have any spares, or the ability to 3D-print one? Thanks in advance Quote Link to comment Share on other sites More sharing options...
+kheller2 Posted December 11, 2020 Share Posted December 11, 2020 Not owning a 400, yes I still have to get one of those, I've not seen this keyboard version: https://www.ebay.com/itm/Vintage-Atari-400-Computer-plus-Koala-Pad-plus-Atari-1030-Modem/154231761692?hash=item23e8edeb1c:g:qZgAAOSwqqdfzi52 Any ideas about it? 2 Quote Link to comment Share on other sites More sharing options...
+Stephen Posted December 11, 2020 Share Posted December 11, 2020 Wow - never saw that one before either. Quote Link to comment Share on other sites More sharing options...
StickJock Posted December 12, 2020 Share Posted December 12, 2020 Maybe the symbol on the "Atari" key can point the way to more info on the manufacturer? Quote Link to comment Share on other sites More sharing options...
ClausB Posted December 12, 2020 Share Posted December 12, 2020 (edited) A surplus 1200XL keyboard could be wired in parallel with the membrane. It wouldn't ruin the 400's looks and it would provide laptop typing. I did that BITD with my 800. A ribbon cable and D connector are wired directly to the motherboard. The gap between plastic case halves is filed open enough for the ribbon to pass through. Edited December 12, 2020 by ClausB Quote Link to comment Share on other sites More sharing options...
Mclaneinc Posted December 12, 2020 Share Posted December 12, 2020 I presume from the lack of wiring that the KB with the Qix cart just sits on top of the membrane and has little plungers that come down? Quote Link to comment Share on other sites More sharing options...
BillC Posted December 12, 2020 Share Posted December 12, 2020 5 hours ago, ClausB said: I did that BITD with my 800. A ribbon cable and D connector are wired directly to the motherboard. The gap between plastic case halves is filed open enough for the ribbon to pass through. I did that BITD(~30 years ago) for my original 400 as well, I removed the 4051 chips on the keyboard and connected via DB25/ribbon cable to the keyboard connector solder pads. If I were to do it today I would use a DA15 and connect to POKEY/other points, without the keyboard modification. 1 Quote Link to comment Share on other sites More sharing options...
+kheller2 Posted December 12, 2020 Share Posted December 12, 2020 3 hours ago, Mclaneinc said: I presume from the lack of wiring that the KB with the Qix cart just sits on top of the membrane and has little plungers that come down? That's what the eBay description says -- "overlay" Quote Link to comment Share on other sites More sharing options...
ClausB Posted December 13, 2020 Share Posted December 13, 2020 19 hours ago, BillC said: I did that BITD(~30 years ago) for my original 400 as well, I removed the 4051 chips on the keyboard and connected via DB25/ribbon cable to the keyboard connector solder pads. If I were to do it today I would use a DA15 and connect to POKEY/other points, without the keyboard modification. Yes, I used a D15. The two sets of 4051s can coexist. I wasn't sure they would, because with most 74LS chips you never connect outputs together, but with these it's OK. Quote Link to comment Share on other sites More sharing options...
+kheller2 Posted January 30, 2021 Share Posted January 30, 2021 Here are some pics of that never before seen 400 keyboard overlay. I snagged this unit of eBay -- my very first 400. Just took 40 some years. Its hard to tell from these pics, but the black plastic is bevelled around the outside edge so it sits nicely on the 400. There are no plastic mold markings telling me where it might have been made. The membrane almost looks cut by hand on the one edge. Very odd thing. 4 Quote Link to comment Share on other sites More sharing options...
+MrFish Posted November 4, 2021 Share Posted November 4, 2021 I saw this on Reddit the other day. Atari 400 Retrofit with Custom Mechanical Keyboard 4 Quote Link to comment Share on other sites More sharing options...
cwilbar Posted November 4, 2021 Share Posted November 4, 2021 I'd like to know more about that one on reddit. If anyone figures out anything more, post it here for all interested in knowing more about it. Quote Link to comment Share on other sites More sharing options...
+MrFish Posted November 4, 2021 Share Posted November 4, 2021 28 minutes ago, cwilbar said: I'd like to know more about that one on reddit. If anyone figures out anything more, post it here for all interested in knowing more about it. If you click on the OP's name, it takes you to this page, which has more information. nicm125 He's interested in producing them. I think he should be persuaded to put up an interest-check thread here; because I'm pretty sure he'd get more response here than on Reddit. 1 Quote Link to comment Share on other sites More sharing options...
bfollowell Posted November 4, 2021 Share Posted November 4, 2021 (edited) I know everyone has their own tastes and opinions, but I really can't begin to understand why anyone would want to ruin, in my opinion, the iconic, retro-futuristic look of the 400 by changing the keyboard, especially to any of the ugly ones (again, my opinion) I've seen in this thread. Don't get me wrong, if it was the early to mid-80s, and the 400 was your main and only computer, then yeah, I get it. These days though, who in the world is typing out the next great world novel on any Atari, especially a 400? If you really want an Atari with a better keyboard, get a 1200XL or an 800XL with the mechanical keyboard. I know I'm probably in the minority, but I love the classic look of the 400 as it is. Edited November 4, 2021 by bfollowell Quote Link to comment Share on other sites More sharing options...
StickJock Posted November 4, 2021 Share Posted November 4, 2021 Interesting key placement. I think that I would prefer to have the Caps & Return keys swapped as well as the Break & Esc keys. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.