ClassicGMR Posted December 18, 2018 Share Posted December 18, 2018 I use mine exclusively through the Intellivoice with no issues. I assume you checked the cart slot for blockage or the cart for cracks? Quote Link to comment Share on other sites More sharing options...
+intellivotion Posted December 18, 2018 Share Posted December 18, 2018 Sorry to bump this thread but I am having trouble inserting my LTO Flash into the slot of the Intellivoice. It just doesn't fit. Is anyone else having this problem? Can't find any info on it. Cheers! a picture of the cart may be helpful to see if the two parts of the shell match/insert each other correctly Quote Link to comment Share on other sites More sharing options...
Janzl Posted December 18, 2018 Share Posted December 18, 2018 I will post some pictures later on. Thanks for the responses. Quote Link to comment Share on other sites More sharing options...
Utopia Posted December 18, 2018 Share Posted December 18, 2018 Sorry to bump this thread but I am having trouble inserting my LTO Flash into the slot of the Intellivoice. It just doesn't fit. Is anyone else having this problem? Can't find any info on it. Cheers! I had a similar problem with one. I have 3 Intellivoice modules and one of them would not take the LTO-Flash. I sent pictures to Joe and Steve and it was clearly moulded slightly differently from the other 2. Quote Link to comment Share on other sites More sharing options...
Janzl Posted December 19, 2018 Share Posted December 19, 2018 @Utopia: Yes there seem to be two "edges" in my voicemodule that hinder my LTO Flash. "Glad" to hear I'm not the only one having this issue. Quote Link to comment Share on other sites More sharing options...
mr_me Posted December 19, 2018 Share Posted December 19, 2018 What's the serial numbers of the problem intelivoices. Please post pictures of the problem. The bright side is that intellivoices are cheap and not hard to find. Quote Link to comment Share on other sites More sharing options...
Intymike Posted December 19, 2018 Share Posted December 19, 2018 What's the serial numbers of the problem intelivoices. Please post pictures of the problem. The bright side is that intellivoices are cheap and not hard to find. In the US...in Europe they are going for about 100 Euros on Ebay. Quote Link to comment Share on other sites More sharing options...
mr_me Posted December 19, 2018 Share Posted December 19, 2018 (edited) Here's an intellivoice for $5.99 buy it now. https://www.ebay.com/itm/Intellivision-INTELLIVOICE-voice-synthesis-module-model-3330-Mattel-Electronics/233026428585?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D20180213162448%26meid%3D2d7f72c498dd4d11a17f19ea35c0fedb%26pid%3D100930%26rk%3D1%26rkt%3D8%26sd%3D273569084698%26itm%3D233026428585&_trksid=p2056116.c100930.m5375 Edited December 19, 2018 by mr_me Quote Link to comment Share on other sites More sharing options...
+cmart604 Posted December 19, 2018 Share Posted December 19, 2018 In the US...in Europe they are going for about 100 Euros on Ebay. Seriously? Yikes! Quote Link to comment Share on other sites More sharing options...
Intymike Posted December 19, 2018 Share Posted December 19, 2018 Seriously? Yikes! https://www.ebay.de/sch/i.html?_from=R40&_nkw=Intellivoice&_sacat=0&rt=nc&LH_PrefLoc=3 Quote Link to comment Share on other sites More sharing options...
mr_me Posted December 19, 2018 Share Posted December 19, 2018 There's some buy it now there for under 28 euro. I only have one intellivoice and I'm not sure if its cheaper to ship from here to europe but if it is maybe one of the guys here can help. Quote Link to comment Share on other sites More sharing options...
+cmart604 Posted December 20, 2018 Share Posted December 20, 2018 https://www.ebay.de/sch/i.html?_from=R40&_nkw=Intellivoice&_sacat=0&rt=nc&LH_PrefLoc=3 Wow! That is a straight up rip off. You don't need one though do you? Quote Link to comment Share on other sites More sharing options...
intvnut Posted December 20, 2018 Share Posted December 20, 2018 I had a similar problem with one. I have 3 Intellivoice modules and one of them would not take the LTO-Flash. I sent pictures to Joe and Steve and it was clearly moulded slightly differently from the other 2. Do you still have a copy of those pictures? I can't seem to find my copy. I'd like to have another look. I'm also curious whether the black cartridge shells have the same issue. Even though they're shot with the same mold, the black shells are slightly thinner than the clear shells and orange shells. The clear shells and orange shells are both Lexan, while the black shells are ABS. Quote Link to comment Share on other sites More sharing options...
Utopia Posted December 20, 2018 Share Posted December 20, 2018 (edited) Do you still have a copy of those pictures? I can't seem to find my copy. I'd like to have another look. I'm also curious whether the black cartridge shells have the same issue. Even though they're shot with the same mold, the black shells are slightly thinner than the clear shells and orange shells. The clear shells and orange shells are both Lexan, while the black shells are ABS. I will try to find those photos. If my memory serves me well the orange shell coupled with the slightly different version (moulding) of the Intellivoice was a tough fit. I think this had been reported only a couple of times. Edited December 20, 2018 by Utopia Quote Link to comment Share on other sites More sharing options...
Janzl Posted December 20, 2018 Share Posted December 20, 2018 If my memory serves me well the orange shell coupled with the slightly different version (moulding) of the Intellivoice was a tough fit. I think this had been reported only a couple of times. Yes that is exactly the combination I own. Quote Link to comment Share on other sites More sharing options...
Intymike Posted December 20, 2018 Share Posted December 20, 2018 Wow! That is a straight up rip off. You don't need one though do you? Got my Intellivoices in times when they more affordable. Quote Link to comment Share on other sites More sharing options...
Utopia Posted December 24, 2018 Share Posted December 24, 2018 Do you still have a copy of those pictures? I can't seem to find my copy. I'd like to have another look. I'm also curious whether the black cartridge shells have the same issue. Even though they're shot with the same mold, the black shells are slightly thinner than the clear shells and orange shells. The clear shells and orange shells are both Lexan, while the black shells are ABS. Joe, I found the original conversation from earlier this year and sent you a p.m. The jist of it is that the board in one of my Intellivoices is seated into the shell in a lower position and that causes the problem. I did not however take pictures like I thought I did. Quote Link to comment Share on other sites More sharing options...
First Spear Posted January 2, 2019 Share Posted January 2, 2019 I posted along time ago that my Christmas Carol cart absolutely would not fit in my Intellivision II. CC uses an LTO-style shell. So I did the right thing and got another Intellivision II. If I look at some of my family original carts (Armor Battle, Space Battle, etc), there are two parallel scratch/wear marks that run from the cart opening to the label.... a picture of the cart may be helpful to see if the two parts of the shell match/insert each other correctly Quote Link to comment Share on other sites More sharing options...
+DZ-Jay Posted January 6, 2019 Share Posted January 6, 2019 I posted along time ago that my Christmas Carol cart absolutely would not fit in my Intellivision II. It's all those Christmas cookies and candies. Carol's getting big. Quote Link to comment Share on other sites More sharing options...
jimj Posted January 6, 2019 Share Posted January 6, 2019 Is the 3.3V/5V issue discussed here much of a concern for the LTO Flash? Quote Link to comment Share on other sites More sharing options...
intvnut Posted January 6, 2019 Share Posted January 6, 2019 Is the 3.3V/5V issue discussed here much of a concern for the LTO Flash? For all the signals sent to the Intellivision, I very specifically only use GPIOs that are rated by the manufacturer as 5V tolerant. The data-sheet helpfully calls out which pins fit this description. See the greyed pins: The same is true for my JLP cartridge board design. The same also applies to Chad Schell's Intellicart and CC3. He stuck to 5V tolerant devices for everything that directly connected to the Intellivision. 2 Quote Link to comment Share on other sites More sharing options...
ricky Posted February 4, 2019 Share Posted February 4, 2019 (edited) In the US...in Europe they are going for about 100 Euros on Ebay. I bought my Intellivoice in the US for 9.99$. These are the shipping costs that have cost dear. It works very well, I'm really not disappointed. https://www.ebay.fr/itm/VINTAGE-ORIGINAL-1981-Mattel-Intellivision-Intellivoice-Voice-Synthesis-Module/254053849497?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Edited February 4, 2019 by ricky Quote Link to comment Share on other sites More sharing options...
Greg2600 Posted September 1, 2019 Share Posted September 1, 2019 I see on the LTO site that it's out of stock, with a limited SE coming. Will that be it (for good) for this device? Quote As of 22-Jun-2019, I am currently out of stock. I do plan to release a limited Special Edition later this summer. Watch this space. Quote Link to comment Share on other sites More sharing options...
IntyFanMatt Posted September 1, 2019 Share Posted September 1, 2019 15 minutes ago, Greg2600 said: I see on the LTO site that it's out of stock, with a limited SE coming. Will that be it (for good) for this device? I certainly hope not! I have been waiting to buy one too. Quote Link to comment Share on other sites More sharing options...
intvnut Posted September 1, 2019 Share Posted September 1, 2019 I am out of stock. I have not decided whether I will make more. I will hopefully get some time in September to put together the Special Edition, which is limited to 25 carts. 2 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.