Omega-TI Posted December 26, 2014 Share Posted December 26, 2014 My system up and running. It's handy being able to move the foot behind the PEB. Dude, that's frikken NICE! I like the way EVERYTHING matches, the view out the window and especially NOT having that huge 'fire hose' sticking out the side of the TI. I may just have to copy your lead on the extension cable there. Do you think black spray paint would hold up on a cable like that? 2 Quote Link to comment Share on other sites More sharing options...
wyerd Posted December 26, 2014 Share Posted December 26, 2014 Do you think black spray paint would hold up on a cable like that? Something like this might do the job http://www.krylonindustrial.com/products/ecoguard_latex_spray_paint_enamels Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted December 26, 2014 Share Posted December 26, 2014 (edited) The pricing seems to be a little steep for that cable. I'll have to forget it for now, or at least until after I get my PS/2 keyboard adapter, which should* be in January. * From what I've been told Well this is the SECOND TIME this guy has gone VAPORWARE on me. Edited December 30, 2014 by --- Ω --- Quote Link to comment Share on other sites More sharing options...
+Vorticon Posted December 27, 2014 Share Posted December 27, 2014 My hobby room in the basement Used to be a nursery, hence the wall border. Easier to leave it in than try to remove it... 2 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted December 27, 2014 Share Posted December 27, 2014 Oooooooh! Is that a Heathkit H5 on the right-hand side of the image? Quote Link to comment Share on other sites More sharing options...
+Vorticon Posted December 27, 2014 Share Posted December 27, 2014 No, it's the Heathkit H19 terminal. I use it with my single board computers. Really solid. 1 Quote Link to comment Share on other sites More sharing options...
Shift838 Posted December 27, 2014 Share Posted December 27, 2014 (edited) Here is my TI system and my secondary dedicated system to use with my emulators. TI: TI-99/4a with F18A upgrade TI RS232 Myarc FDC with 80 track upgrade SCSI REV F card HRD 1MB 1MB SAMS card CorComp Triple Tech Card 2 x 3.5 drives at 720k 1 x 3.5 drive at 360k 1 x 5.25 drive at 360k 1 x EZ135 SCSI drive 1 x 250mb SCSI hard drive Original TI External Power supply External PS for SCSI drives. UDS10 which cannot be seen as it's under the desk External 14.4 modem (I only get 9600 out of it on the TI on the BBS, 4800 bps if I call out without it). I have an HDX card I have not put in yet. The dedicated system I use for emulation and is running Windows 7 32bit It is model X5A by xi3.com Not much bigger than a coke can. 1.8GHz dual–core x86-based, 64–bit processor 4GB DDR2 RAM 128GB mSATA SSD 6 – USB 2.0 ports 2 – eSATAp ports 1 – 1Gb Ethernet port 1 – Microphone connector 1 – Headphone connector 1 – Line-in/Line-out connector 1 – DisplayPort (DP/DVI, HDMI optional) 1 – DisplayPort (DVI + VGA, DVI-DL) Power: 20 watts External Size: 4.270x3.656x3.656–inches Edited December 27, 2014 by Cschneider 2 Quote Link to comment Share on other sites More sharing options...
Sinphaltimus Posted October 9, 2021 Share Posted October 9, 2021 This is my "non-TiPi" system. 5 Quote Link to comment Share on other sites More sharing options...
globeron Posted October 11, 2021 Share Posted October 11, 2021 (edited) Another thread: https://atariage.com/forums/topic/218727-ti-99-photos-thread-post-your-systems-here/?tab=comments#comment-2868453 And my setup https://atariage.com/forums/topic/218727-ti-99-photos-thread-post-your-systems-here/?do=findComment&comment=4565730 Edited October 11, 2021 by globeron 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.