TI-GAMER Posted August 8, 2015 Share Posted August 8, 2015 I have an Atarisoft Cart that has something rattling around inside and wanted to open it up without damaging it. As you know, its not like the standard TI Cart. How does an Atarisoft Cart come apart? Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted August 8, 2015 Share Posted August 8, 2015 The rattling in my Pac Man and Pitstop cartridges was a broken post which supports ROM board inside. As for opening, I do not recall how I opened mine. Quote Link to comment Share on other sites More sharing options...
Gazoo Posted August 8, 2015 Share Posted August 8, 2015 It's glued together. You have to very carefully pry it apart at the seam. Gazoo Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted August 8, 2015 Share Posted August 8, 2015 It's glued together. You have to very carefully pry it apart at the seam. Gazoo yes, it's true, when they will be opened, they will remain open. and the plastic pin that held the PCB inside was broken. i never been able to close again mine two, no screw or joints of some sort, only clue but not working for the broken pin Quote Link to comment Share on other sites More sharing options...
Shift838 Posted August 8, 2015 Share Posted August 8, 2015 When i was a kid my older brother some how broke the pin inside my Defender cartridge and the cart just moved around inside. I just had to open it and leave the cart out to be used. 1 Quote Link to comment Share on other sites More sharing options...
Toucan Posted August 9, 2015 Share Posted August 9, 2015 (edited) What's interesting is that I talked with Barry Friedman from ICG (International Computer Group) who did some of the Atarisoft TI conversions and they actually produced them themselves at their production line in Hong Kong. Centipede was one such title. It should say "Made in Hong Kong" on the cart. Also, they printed the manuals and boxes. This is why the manuals for Dig-Dug, Centipede, and some others look different. The ones made by ICG were those white manuals with the title written across (http://www.videogamehouse.net/CentipedeM.jpg). Anyway, the ICG made carts have a screw under the label. He did mention that it should say "ICG" in the screw hole if anyone wants to open Centipede or Dig-Dug up and confirm I don't remember which others they did, but if the manual looks like the Centipede one in the link, it's ICG. Just some neat trivia! BTW, these guys were working on Battlezone for Atarisoft on the TI as well. I'd say Atari got a good deal with these guys as ICG did everything, programming, production, and all. All Atari had to do was market the games. Edited August 9, 2015 by Toucan 2 Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted August 9, 2015 Share Posted August 9, 2015 BTW, these guys were working on Battlezone for Atarisoft on the TI as well. I'd say Atari got a good deal with these guys as ICG did everything, programming, production, and all. All Atari had to do was market the games. Any prototype around? Quote Link to comment Share on other sites More sharing options...
am1933 Posted August 9, 2015 Share Posted August 9, 2015 This thread comes at a fortunate time for me as I have been working on a prototype Atarisoft cartrdge opener, please see illustration of working model. I wil be taking orders based on test data. 6 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted August 9, 2015 Share Posted August 9, 2015 ah, but you don´t need a prototype, as there is a released one 1 Quote Link to comment Share on other sites More sharing options...
globeron Posted August 9, 2015 Share Posted August 9, 2015 I like the openers (since we are talking about Atari, have you seen the movie Pixels? many Atari games inside the movie and also for TI: "Centipede", "Donkey Kong", "Pac-Man") and the Parker Brothers ones: Q-bert, Frogger and a few others? (Galaxy invaders? and some other games in the background "Paper-boy", "Mario" and a few othes, the red-dress lady one with the swords I do not know) you can google "viooz pixels" (but you are on you own for the next clicks) Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted August 9, 2015 Share Posted August 9, 2015 When I hear the term "Cartridge Opener", I remember a gadget a friend used to use... 1 Quote Link to comment Share on other sites More sharing options...
+Psionic Posted August 2, 2019 Share Posted August 2, 2019 On 8/8/2015 at 8:52 PM, Toucan said: What's interesting is that I talked with Barry Friedman from ICG (International Computer Group) who did some of the Atarisoft TI conversions... ...I'd say Atari got a good deal with these guys as ICG did everything, programming, production, and all. All Atari had to do was market the games. I just wanted to state for the record that while ICG served as the "producer" for these TI ports, they did not actually program them. ICG was essentially a middleman operation and any game that they were involved with was ultimately developed by someone else. In this case, the Atarisoft TI ports in question were developed by programmers at Rich & Rich (aka Syndein Systems), who did a lot of work under subcontract with ICG (including many of the Atarisoft ports for the VIC-20). I've never tried to open any of their VIC-20 cartridges, but they were also manufactured in Hong Kong and are likely of similar construction. 2 Quote Link to comment Share on other sites More sharing options...
1980gamer Posted August 2, 2019 Share Posted August 2, 2019 I opened my Donkey Kong Cart by dropping it of the desk.... if that helps in any way? 1 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted August 3, 2019 Share Posted August 3, 2019 21 hours ago, 1980gamer said: I opened my Donkey Kong Cart by dropping it of the desk.... if that helps in any way? That just shows that the Atarisoft cases weren't quite as robust as the ones from TI. ☺️ 1 Quote Link to comment Share on other sites More sharing options...
+Psionic Posted August 5, 2019 Share Posted August 5, 2019 Can anyone who has opened one of these cartridges (purposefully or accidentally) show or at least tell me what the PCB inside looks like? Some of these titles should be on K-Byte boards but I'm curious about the other ones. Quote Link to comment Share on other sites More sharing options...
HOME AUTOMATION Posted August 6, 2019 Share Posted August 6, 2019 (edited) Here you go... This is probably: DEFENDER This should be: PICNIC PARANOIA Edited August 6, 2019 by HOME AUTOMATION 1 2 Quote Link to comment Share on other sites More sharing options...
Tursi Posted August 6, 2019 Share Posted August 6, 2019 Interesting! My Defender was a blob chip. What you show there is what I /wanted/ to see when I cracked mine open. (I can't post a pic as I've no idea where it is...) 3 Quote Link to comment Share on other sites More sharing options...
HOME AUTOMATION Posted August 6, 2019 Share Posted August 6, 2019 kool! My systems been mothballed for few months now... but I just checked... they are listed correctly. 1 Quote Link to comment Share on other sites More sharing options...
CRV Posted August 6, 2019 Share Posted August 6, 2019 (edited) Someone posted the PCBs here in 2016 (I just found this): Most of them were manufactured by K-Byte, except the ones made in Hong Kong. Those were by a company called Elcap. Edited August 6, 2019 by CRV Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted August 6, 2019 Share Posted August 6, 2019 Scan the label before defacing it to access the screw, that way when reassembled it'll look as good as new. 1 Quote Link to comment Share on other sites More sharing options...
+Psionic Posted August 6, 2019 Share Posted August 6, 2019 27 minutes ago, CRV said: Most of them were manufactured by K-Byte, except the ones made in Hong Kong. Those were by a company called Elcap. Thanks, I didn't catch that. At least now we know that Picnic Paranoia and Protector II are on K-Byte PCBs so they may have done them, although the Sofmachine games are on K-Byte boards also. Mike Yantis programmed Protector II, and from this post it can be deduced that he may have worked for Sofmachine. This post also confirms that the C64 version of Dig Dug was developed by K-Byte. Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted August 6, 2019 Share Posted August 6, 2019 1 hour ago, --- Ω --- said: Scan the label before defacing it to access the screw, that way when reassembled it'll look as good as new. A heat gun on the label, used gently to not scorch the label and deform the plastic, will soften the adhesive so you can remove the label without damaging it. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.