Isgoed Posted September 21, 2015 Share Posted September 21, 2015 Does anybody know if there is a schematic available for the Jaglink II, and if so where to find it? I've searched the web without any luck. I also sent Else a message, but he did not reply. If there is a schematic then I will try and make a Jaglink II myself. Quote Link to comment Share on other sites More sharing options...
Zerosquare Posted September 21, 2015 Share Posted September 21, 2015 (edited) I don't believe the JagLink 2 schematic has been released. That said, there's some info there: http://atariage.com/forums/topic/67235-need-info-about-jaglink-2/ and there: http://web.archive.org/web/20030415024811/http://home.attbi.com/~delse/jaglink2.html Edited September 21, 2015 by Zerosquare 1 Quote Link to comment Share on other sites More sharing options...
TXG/MNX Posted September 22, 2015 Share Posted September 22, 2015 Check ebay for jaglinks they are still sold, I think Nick for 16-32bit systems has sold jaglink II's in the past maybe he has one laying around. A jaglink II is only handy for games like aircars, battlesphere for more then 2 players otherwise the original jaglink will do. But do you got more then 3 jaguars and 3 players to make use of it ? Mostly getting a few jaguar users together is the most difficult issue. 1 Quote Link to comment Share on other sites More sharing options...
Isgoed Posted September 22, 2015 Author Share Posted September 22, 2015 Thanks for the info Zerosquare. TXG/MNX, yes, I will ask Nick, and no, the Jaguars and players are no problem Quote Link to comment Share on other sites More sharing options...
TXG/MNX Posted September 23, 2015 Share Posted September 23, 2015 Thanks for the info Zerosquare. TXG/MNX, yes, I will ask Nick, and no, the Jaguars and players are no problem Cool we should plan an aircars or battlesphere challenge then Sent from UMI hammer with Tapatalk Quote Link to comment Share on other sites More sharing options...
+CyranoJ Posted September 23, 2015 Share Posted September 23, 2015 Cool we should plan an aircars or battlesphere challenge then Sent from UMI hammer with Tapatalk 16 skunkboards should do it 2 Quote Link to comment Share on other sites More sharing options...
TXG/MNX Posted September 24, 2015 Share Posted September 24, 2015 I think we have done a battlesphere challenge once at E-jagfest UK with 16 players (original battllesphere) and (s)catboxes... Maybe I got some pictures of it somewhere... 16 jags with 16 monitors and (s)catboxes with monitors took at lot of space .... not really something to setup in your livingroom... 1 Quote Link to comment Share on other sites More sharing options...
Trooper Galactus Posted September 30, 2015 Share Posted September 30, 2015 Check ebay for jaglinks they are still sold, I think Nick for 16-32bit systems has sold jaglink II's in the past maybe he has one laying around. A jaglink II is only handy for games like aircars, battlesphere for more then 2 players otherwise the original jaglink will do. But do you got more then 3 jaguars and 3 players to make use of it ? Mostly getting a few jaguar users together is the most difficult issue. This. I got one sealed when I bought a games lot, and I've had zero happen that would compel me to open it. It has limited utility even before considering there's rarely enough Jaguars in close proximity to make use of it. Quote Link to comment Share on other sites More sharing options...
Zerosquare Posted August 22, 2021 Share Posted August 22, 2021 Since someone asked, here's my reverse-engineering of the JagLink II: 8 5 Quote Link to comment Share on other sites More sharing options...
krupkaj Posted September 1, 2021 Share Posted September 1, 2021 (edited) Together with Bob!k we made this version last year. We tested it successfully with BattleSphere and Aircars in 3 players. I think I still have some spare PCB yet. Edited September 1, 2021 by krupkaj 5 Quote Link to comment Share on other sites More sharing options...
+cubanismo Posted September 1, 2021 Share Posted September 1, 2021 Nice. I'd be interested in one of those JagLink II PCBs and a parts list if they're available. Also, since I'm just about done putting together a board that looks like it is more or less the same as your video breakout PCB, curious what the schematic for that is. Namely, what are those switches doing on there? Quote Link to comment Share on other sites More sharing options...
Doomy Doomer Posted September 1, 2021 Share Posted September 1, 2021 1 hour ago, krupkaj said: Together with Bob!k we made this version last year. We tested it successfully with BattleSphere and Aircars in 3 players. I think I still have some spare PCB yet. Very nice! One thing that was interesting that I noted to Zeroaquare was the JagLink II's board has 5v going into an empty pin 1 on both RJ11 connectors, at least on his. I was talking to James from Retro HQ and he said his have all 6 connectors on the RJ11. The JagLink II documentation I could find from 2003 even mentions Pins 1 and 6 on the JagLink II as power in / out between the two + jags. I ordered some boards to test this schematic out either way but I also designed a shell and plan on selling them if everything works out. The main goal though was to try and integrate this into my Jag2HD for a later model. Here's a super rough model next to my Jag2GEN: 3 Quote Link to comment Share on other sites More sharing options...
+af0l Posted September 1, 2021 Share Posted September 1, 2021 I'll 2 hours ago, krupkaj said: Together with Bob!k we made this version last year. We tested it successfully with BattleSphere and Aircars in 3 players. I think I still have some spare PCB yet. 3 pcs for me, if you still have them! Quote Link to comment Share on other sites More sharing options...
Cyprian Posted September 2, 2021 Share Posted September 2, 2021 16 hours ago, krupkaj said: Together with Bob!k we made this version last year. We tested it successfully with BattleSphere and Aircars in 3 players. I think I still have some spare PCB yet. audio and VGA out! would be possible to buy those expansions? Quote Link to comment Share on other sites More sharing options...
+Mitch Posted September 2, 2021 Share Posted September 2, 2021 So are these compatible with a Catbox Catnet connection? Otherwise how are you connecting more than two systems? Mitch Quote Link to comment Share on other sites More sharing options...
Zerosquare Posted September 2, 2021 Share Posted September 2, 2021 (edited) On 9/1/2021 at 11:13 PM, Doomy Doomer said: One thing that was interesting that I noted to Zeroaquare was the JagLink II's board has 5v going into an empty pin 1 on both RJ11 connectors, at least on his. I was talking to James from Retro HQ and he said his have all 6 connectors on the RJ11. The JagLink II documentation I could find from 2003 even mentions Pins 1 and 6 on the JagLink II as power in / out between the two + jags. So it means they used both 6P6C and 6P4C connectors on the JagLink II, depending on the production run. If it's by design, that's strange ; maybe they just used whatever was in stock at the time? 52 minutes ago, Mitch said: Otherwise how are you connecting more than two systems? Since there are two RJ11 ports, you connect either of them to the previous console in the chain, and the other one to the next console. Edited September 2, 2021 by Zerosquare Quote Link to comment Share on other sites More sharing options...
Doomy Doomer Posted September 3, 2021 Share Posted September 3, 2021 13 hours ago, Zerosquare said: So it means they used both 6P6C and 6P4C connectors on the JagLink II, depending on the production run. If it's by design, that's strange ; maybe they just used whatever was in stock at the time? I asked James to confirm and actually he meant it's a 6C4P on his as well, so no Pin 1 or 6 populated in the socket. I'd go back and edit my original post but sadly AA doesn't let you do that. Mystery solved I guess. 1 Quote Link to comment Share on other sites More sharing options...
Cyprian Posted February 15 Share Posted February 15 On 9/1/2021 at 9:31 PM, krupkaj said: Together with Bob!k we made this version last year. We tested it successfully with BattleSphere and Aircars in 3 players. I think I still have some spare PCB yet. nice one, is there a schematic of the right board available somewhere? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.