AK2UK Posted January 19, 2016 Share Posted January 19, 2016 I was wondering if anyone has access to a 1064 memory module. I'm trying to get measurements so I can 3d print a case for one to use as a modified raspberry Pi case. Ideally, a scan for 3d printing would be great, but I'd be happy with detailed measurements if possible. Thanks to anyone that can help, James. Quote Link to comment Share on other sites More sharing options...
yorgle Posted January 19, 2016 Share Posted January 19, 2016 (edited) If you mean the case itself (not the PCB), the one I have here is 71/4 inches L x 3 3/4 inches W x 1 3/4 H. These are the overall measurements, including the "bump out" area on the bottom, but NOT including the bump out for the PBI connector. There is a 1/4 inch wide, 45 deg bevel around the outside edge, top and bottom. Edited January 19, 2016 by yorgle Quote Link to comment Share on other sites More sharing options...
AK2UK Posted January 19, 2016 Author Share Posted January 19, 2016 (edited) Thank you very, very much. Those are the measurements I needed. You're a life saver dude !!! Edited January 19, 2016 by AK2UK Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.