Flottmann1 Posted January 19, 2021 Share Posted January 19, 2021 (edited) 1 hour ago, Schmitzi said: @Flottmann1 aber das Konto ? bekomme beim initialisieren Fehler ! I/O Error 07 in 9060 (Classic99) ID-KONTO.dsk Edited January 19, 2021 by Flottmann1 Quote Link to comment Share on other sites More sharing options...
+mizapf Posted January 20, 2021 Share Posted January 20, 2021 Tried in MAME, I got I/O ERROR 00 in 140 and 150 (trying to open SCS6....) Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 20, 2021 Author Share Posted January 20, 2021 5 hours ago, Flottmann1 said: bekomme beim initialisieren Fehler ! I/O Error 07 in 9060 (Classic99) ID-KONTO.dsk 180 kB · 4 downloads yep, Oliver made some changes to use it on harddisk (SCS6) Before changing that back with much work, maybe we can have another looki for the original disk. See page 1 here: ID-KONTO-PrintFile.pdf 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 20, 2021 Author Share Posted January 20, 2021 PS: As he made some more changes (Jahrszahl), maybe we change this newer version back to FDD ? Or make it selectable ? Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 20, 2021 Author Share Posted January 20, 2021 On 12/9/2019 at 5:51 PM, FarmerPotato said: This is a set of TI internal documents for the 99/4 Video Tape Recorder Controller. The engineer was Bill Goodwill. It includes the schematic, drawings, and supporting design, test, and manufacturing documents. Also included are the common Design to Production Product Phaseover guidelines. The VCR Controller was to share the RS232 sidecar case and power supply. The drawings show its own back panel and cable assemblies. According to the Peripheral/Product Spec, the flex cable to the VCR emerges from the side port, so the VTR must be the last peripheral in a chain. I wonder if this was the origin for the P-Box flex cable? I found the documents in a single binder, in this order: VCR Schematic_1 VCR Schematic_2 VCR Schematic_3 VCR Operating, Product and Peripheral Specs VCR Owners Manual VCR Two BASIC Programs VCR Test Spec Design to Production Product Phaseover VCR Flex Cable Diagram VCR Back Panel VCR Parts List VCR Pert Chart VCR Cable Assembly VCR Relay Requirements Some BASIC programs are included. One parts list names a 4732 ROM (4K) that could have provided the DSR and BASIC support routines. Another parts list omits it. The Specs and Owners Manual describes a Command Module needed for programming. The Specs mention a DSR and refer to a MISSING VTR Peripheral Software Specification. An empty divider tab was labeled ROM/GROM LIST. The Test Specs describe a ROM at CRU >1C00. BASIC statements in the Owner's Manual include: CALL @VINIT CALL @VADDR CALL @VSEND CALL @VREW CALL @VSTOP CALL @VFWD CALL @VRLON CALL @VRLOFF The Test Specs show a lower level interface: CALL @CRON CALL @CROFF CALL @TEST I don't see how these would be CRU operations, because the addresses don't make sense. >3241 is passed. Enjoy this find. kl99, please store it in WHTECH or the Cyc where it can be preserved. Let me know if there are any problems with the scans (I scanned the drawings and schematics at higher resolution). Design to Production Product Phaseover.PDF 211.03 kB · 29 downloads VCR Back Panel.pdf 1.67 MB · 28 downloads VCR Cable Assembly.PDF 3.73 MB · 27 downloads VCR Flex Cable Diagram.pdf 415.1 kB · 25 downloads VCR Operating, Product and Peripheral Specs.PDF 808.99 kB · 28 downloads VCR Owners Manual.PDF 452.91 kB · 24 downloads VCR Parts List.PDF 2.32 MB · 26 downloads VCR Pert Chart.PDF 155 kB · 26 downloads VCR Relay Requirements.PDF 132.08 kB · 26 downloads VCR Schematic_1.PDF 2.25 MB · 25 downloads VCR Schematic_2.PDF 2.04 MB · 25 downloads VCR Schematic_3.PDF 2.04 MB · 24 downloads VCR Test Spec.PDF 575.63 kB · 27 downloads VCR Two BASIC Programs.pdf 3.22 MB · 27 downloads Hi, as the Panasonic NV-8200 VHS Video Recorder was mentioned in the "VCR Owners Manual" here above, and as I saw this manual while lurking a long time around for it, and finally bought it, I scanned it ?️♀️ Panasonic-National--NV-8200-VHS-Video-Cassette-Recorder--Operating-Instructions-S1180M0-500--OCR.pdf btw, as it wasn´t available, this also was my very first upload to archive.org now. I hope, they don´t come and arrest me ? ? 3 1 Quote Link to comment Share on other sites More sharing options...
Flottmann1 Posted January 20, 2021 Share Posted January 20, 2021 (edited) I tested with these 3 floppy Disks on a real TI-99 with PEB etc. and created a DATA and an ACCOUNT (KONTO) Disc for example with Classic99: insert the ID-DATA Disc into LW-1, the DATA Disc in LW-2 and the Konto Disc in LW-3 run XB now professional Business People like "Schmitzi" should be able to work from Home with it (Homeoffice !) ID-DATA.DSK DATA.dsk KONTO.dsk Edited January 20, 2021 by Flottmann1 2 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 20, 2021 Author Share Posted January 20, 2021 ? Quote Link to comment Share on other sites More sharing options...
+9640News Posted January 26, 2021 Share Posted January 26, 2021 I'm looking for several things. The Myarc Advanced Basic PDF on ftp.whtech.com under the Geneve folder appears to be corrupted. Can someone please confirm? I've tried loading on 3 different computers without success and hopefully someone has a good scan some place. I've got an original unscanned, but looking for a good scanned version. Second, I am looking for the software manuals for McCann's software The Printer's Apprentice and The Geometer's Apprentice, both for MDOS. Any help is appreciated. Thanks. Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 26, 2021 Author Share Posted January 26, 2021 Do you have a link ? Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 26, 2021 Author Share Posted January 26, 2021 (edited) here is the one I downloaded some years ago: abasic_manual.zip Addendum: MYARC ADVANCED BASIC MANUAL NOTES AND CORRECTIONS.pdf Edited January 26, 2021 by Schmitzi 2 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 26, 2021 Author Share Posted January 26, 2021 The Geometer´s Apprentice I only have an old scan: The Geometer's Apprentice manual.pdf 3 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 26, 2021 Author Share Posted January 26, 2021 TPA scan pending 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 26, 2021 Author Share Posted January 26, 2021 I got it in the mail last week, so here it is, a fresh new scan from today: The Printer´s Apprentice - Mike McCann Software 1989 - MDOS Version 1.0 tpa-The Printers Apprentice-McCann Software-MDOS Version 1.0-1989-OCR.pdf 4 1 Quote Link to comment Share on other sites More sharing options...
+9640News Posted January 26, 2021 Share Posted January 26, 2021 Thanks for the files everyone. Not sure if the file on ftp.whtech.com is actually a zip labeled as a PDF, or really a PDF that is corrupted causing the browser to give a bad file description. I came across my TGA and TPA disks and was trying to figure out some things that weren't obvious. Beery 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 26, 2021 Author Share Posted January 26, 2021 4 minutes ago, BeeryMiller said: Thanks for the files everyone. Not sure if the file on ftp.whtech.com is actually a zip labeled as a PDF, or really a PDF that is corrupted causing the browser to give a bad file description. I came across my TGA and TPA disks and was trying to figure out some things that weren't obvious. Beery I made it ZIP a minute before just to get it under 50 MB here on AA. (I dont know how much is allowed) Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted January 26, 2021 Share Posted January 26, 2021 I'm looking for several things. The Myarc Advanced Basic PDF on ftp.whtech.com under the Geneve folder appears to be corrupted. Can someone please confirm? I've tried loading on 3 different computers without success and hopefully someone has a good scan some place. I've got an original unscanned, but looking for a good scanned version. Second, I am looking for the software manuals for McCann's software The Printer's Apprentice and The Geometer's Apprentice, both for MDOS. Any help is appreciated. Thanks.Opens fine here.. win 10 Adobe reader dcSent from my LM-V600 using Tapatalk Quote Link to comment Share on other sites More sharing options...
+9640News Posted January 26, 2021 Share Posted January 26, 2021 4 minutes ago, arcadeshopper said: Opens fine here.. win 10 Adobe reader dc Sent from my LM-V600 using Tapatalk I couldn't get a transfer to complete without an error..... This is Windows 10 Edge. Quote Link to comment Share on other sites More sharing options...
+mizapf Posted January 26, 2021 Share Posted January 26, 2021 No problem here either; I am attaching the file (I think it was my scan). abasic_manual.pdf 1 Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted January 26, 2021 Share Posted January 26, 2021 11 minutes ago, BeeryMiller said: I couldn't get a transfer to complete without an error..... This is Windows 10 Edge. Quote Link to comment Share on other sites More sharing options...
blackbox Posted February 3, 2021 Share Posted February 3, 2021 TIF images to read, print, ocr or pdf.... A zip file containing hi res images scanned from the manual for: INVOICE MANAGEMENT PHD5027. 1980. NOTE: The 1982 program package for Britain and Germany contained differing programs requiring a different manual. THIS manual is for the 1980 USA disk. (1980 version = Y or N for Sales Tax; 1982 version = 5 rates of VAT) .The instructions are not compatible. The GB 1982 issue has turquoise disk labels and the 1982 GB disk omits the program WRITE. Requires either Personal Record Keeping OR Statistics modules. The disk programs are written in TI Enhanced Basic (eg with one of those modules plugged in) by Janet Srimushnam. Data can be converted to and from PRK/Stats format "The Invoice package is designed to work with the Inventory Management package".. Thermal printer or RS232 printer optional. All the programs use CALL A and CALL D, and the CONVERT programs of course use the CALL G, CALL H, CALL S subprograms. Listing these programs is a great way to learn what to do to marry TI Basic programs and the Stats/PRK modules for data management. The user is encouraged to personalise the Basic program called "PRINT". Inoice Management allows the user to select the proportion of stock and customer records- for example 10 stock items + 558 customer records. Or 800 stock items with 400 customer files - you enter the number of stock items and the computer tells you how many customers records you may have. There was a European manual for DE/GB in 1982 (PHD5027/GE) and a separate DE disk (Rechnungsstellung) in German. The G/E 1982 disk used different disk files to the 1980 disk, requiring differing instructions. THIS manual is for the USA disk of 1980 (Basic programs dated March 1982). If your disk has the Basic program "WRITE" it is the one this manual refers to. Programs on the disk: CONVERT1; CONVERT2; INIT; PRINT; WRITE; DELETE; UPDATE and data file CUSTOMER used by CONVERT1 ; Files created on disk for the program to use: COND is methods and terms of payment; CUST is cutomer data; STOCK is stock items. Programs CONVERT1 and CONVERT2 require the use of CALL P(8000). There is a separate document available on the extra PRK/Stats BASIC calls (see "http://ftp.whtech.com/datasheets and manuals/Official TI addenda and data sheets/BASIC CALLs in PRK & Statistics modules.pdf"). The number of sales of this diskette may be indicated by Dutch and UK user groups "discovering" the extra calls four years later and spending a lot of time investigating them when a look at the programs on this disk would have revealed if not all, then at least a great deal. Here is also a DSK file to download. Coming next- Millers Graphics DisKAssembler Version 1- yes it is already on Atariage as part of a PDF package containing also V2, but the V1 part is a PDF scanned at two pages per PDF page which is not to my preference- and I also de-skew the worst skewed pages as well as using a high dpi and some cleanup.... after that I have some quite obscure Scholastic educational manuals. Diskassembler is a DISASSEMBLER not a disk based assembler... InvoiceMgt.dsk InvoiceMgt.zip 6 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted February 3, 2021 Share Posted February 3, 2021 Well, that took a while, but I combined all of @blackbox's Invoice Management scans into a single PDF. Thanks again for scanning these Blackbox! Invoice Management.pdf 3 Quote Link to comment Share on other sites More sharing options...
blackbox Posted February 11, 2021 Share Posted February 11, 2021 A zip containing clean high res TIF images of the manual for Millers Graphics DISkASSEMBLER which is NOT an assembler, it is a two-pass DISassembler.... You can OCR, PDF, read or print as you wish. The zip includes the important Addendum amending the instructions re RORG and a correction to the initial MiniMemory load location. Also included is the required function strip. Next up will be some educational modules from Scholastic. Does anyone have manuals that are not yet on atariage but they lack the time or inclination to scan them? I'm running out here so if anyone would like to send some on loan please message me. Note that I am in England when considering postage costs- sending a 500 page A4 binder from the USA wouldn't be great- unless I can keep it and not send it back!! Otherwise I will pay the cost of returning manuals to you. I am not the fastest scanner so do message me first so we can agree what is to be sent and when! Would you like to see scans of TI programs or articles from UK commercial magazines? Disakassembler_MillersV1.zip 4 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted February 12, 2021 Share Posted February 12, 2021 Scans of the TI materials from the various UK magazines would definitely be a good thing, as a lot of that material isn't available online. I only have a small number of UK magazine issues. Most of my European magazine collection consists of items from Germany, Austria, Switzerland, Holland, Belgium, France, and Italy. 1 Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted February 12, 2021 Share Posted February 12, 2021 (edited) @Ksarul I am scanning lot of them, someone is already published on the ti99iuc DB others I need to clean and publish, just need lot of time after scans- Anyway I decided to scan only the TI99 releated pages and including the Front/Back cover and index of the magazine at least. for the moment I am covering these: https://www.ti99iuc.it/web/index.php?testo=&pageid=database_cerca&db_categoria=documents&db_tipologia=magazines&db_costruttore=*&db_linguaggio=*&db_lingua=*&db_anno=*&db_sviluppatore=*&db_editore=*&db_sistema=*&db_formato=*&db_submit=Esegui+ricerca... But also working on all Home Computer Weekly with the help of David J. Smith, almost completed all issues only missing about 10. Edited February 12, 2021 by ti99iuc 2 Quote Link to comment Share on other sites More sharing options...
Flottmann1 Posted February 17, 2021 Share Posted February 17, 2021 Disk Fixer and german TI-Compiler TI-Compiler.pdf DiskFixer.pdf 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.