llopis Posted February 18, 2019 Share Posted February 18, 2019 I'm looking for an UnoCart and I'm based in Europe. Where's the best place to get one? Thanks. Quote Link to comment Share on other sites More sharing options...
+MacRorie Posted February 18, 2019 Share Posted February 18, 2019 I'm looking for an UnoCart and I'm based in Europe. Where's the best place to get one? Thanks. I would like to think it is here: https://www.thebrewingacademy.com/ or, if you like eBay, here: Atari XL/XE UNOCart Cartridge microSD card for loading ATR/ROM/CAR/XEX 1 Quote Link to comment Share on other sites More sharing options...
llopis Posted February 18, 2019 Share Posted February 18, 2019 I would like to think it is here: https://www.thebrewingacademy.com/ or, if you like eBay, here: Atari XL/XE UNOCart Cartridge microSD card for loading ATR/ROM/CAR/XEX :-) The shipping is a bit steep to Europe, but if there aren't any local sources I'll probably get one. Or maybe I'll wait until this summer and get it when I'm back in the US. I've bookmarked the page for now. Thanks! Quote Link to comment Share on other sites More sharing options...
+MacRorie Posted February 19, 2019 Share Posted February 19, 2019 Yeah, sorry, the new USPS rates do not make it any easier. I understand. -M Quote Link to comment Share on other sites More sharing options...
gooner4life7 Posted September 11, 2019 Share Posted September 11, 2019 Great project would love to make one my self. Looked on the github page great work. But cant seem to find the Gerber files for the amazing pcb is it not available to the public. Thank Quote Link to comment Share on other sites More sharing options...
+MacRorie Posted September 11, 2019 Share Posted September 11, 2019 Gerber files are not available to the public. If you would like an UNO cart, they are available for sale. https://thebrewingacademy.com/collections/atari-800-xl-xe-xel-xld/products/atari-xl-xe-uno-cart 1 Quote Link to comment Share on other sites More sharing options...
Wrathchild Posted September 11, 2019 Share Posted September 11, 2019 At a guess (and given a handle of gooner4life7) I'd say this would be a UK buyer so might be unlikely but worth PM'ing electrotrains to see if any are available here. 1 Quote Link to comment Share on other sites More sharing options...
+MacRorie Posted September 11, 2019 Share Posted September 11, 2019 (edited) On 9/11/2019 at 9:52 AM, Wrathchild said: At a guess (and given a handle of gooner4life7) I'd say this would be a UK buyer so might be unlikely but worth PM'ing electrotrains to see if any are available here. That's fair. However, if you buy two two plus something else like a power cable for the UK! (or any total order over $100 $125), it's free shipping worldwide! Edited October 8, 2019 by MacRorie Edited to reflect increase in minimum rate. 1 Quote Link to comment Share on other sites More sharing options...
gooner4life7 Posted September 11, 2019 Share Posted September 11, 2019 I like making stuff and just wanted to give it a go. Yes I'm From the uk But I see the ultimate has gerber files on github so I'll try that instead. Thanks For the help Quote Link to comment Share on other sites More sharing options...
+Andrew Davie Posted October 8, 2019 Share Posted October 8, 2019 On 9/12/2019 at 3:01 AM, MacRorie said: That's fair. However, if you buy two (or any total order over $100), it's free shipping worldwide! I'm wavering on the 2600 Uno Cart, and the above prompted me to put a second in my cart. I'm now at $80. What am I missing? It's the $23 shipping that's making me hesitate here... Your sneaky ordering system prodded me with an email reminding me I have one in my cart, just wasting away.... Quote Link to comment Share on other sites More sharing options...
+MacRorie Posted October 8, 2019 Share Posted October 8, 2019 2 hours ago, Andrew Davie said: I'm wavering on the 2600 Uno Cart, and the above prompted me to put a second in my cart. I'm now at $80. What am I missing? It's the $23 shipping that's making me hesitate here... Your sneaky ordering system prodded me with an email reminding me I have one in my cart, just wasting away.... So, a couple of things: The amount of the sale has to be at $125 or higher to get free international shipping.* The $23 is significant, I know, but once you cross 8 oz (~0.25kg) the shipping rate skyrockets. It stays level until you reach about a kilo and then it goes even more insane. *=It was $100 for worldwide shipping, but I raised it to $125 on the first of this month (https://thebrewingacademy.com/blogs/news/order-flying-out-the-door-and-the-free-shipping-continues-with-a-slight-modification). It should stay at that level until the US arbitrarily leaves the Universal Postal Union that it has been in since 1844. Quote Link to comment Share on other sites More sharing options...
SS Posted October 8, 2019 Share Posted October 8, 2019 3 hours ago, Andrew Davie said: I'm wavering on the 2600 Uno Cart, Andrew, do you need a 2600 UNO for Sokoban development? I would be happy to send you mine as a thank you for all of your work for the community over the years. I'll send you a PM to get some more details. Quote Link to comment Share on other sites More sharing options...
+Karl G Posted October 12, 2019 Share Posted October 12, 2019 Are 128K ROMs supported? The website says up to 64K, but the github site says up to 128k. If 128K is supported, which bankswitching schemes are compatible? I tried a DFSC ROM with no luck. Thanks! Edit: This should have been in the Atari 2600 forum. Oops! Quote Link to comment Share on other sites More sharing options...
Wrathchild Posted October 12, 2019 Share Posted October 12, 2019 Going by the firmware sources: standard 8k/16k XEGS 32k/64k/128k & Switchable bounty bob atarimax 128k williams 64k OSS 8k/16k (type B) OSS 16k (034M/043M) megacart 16k/32k/64k/128k SIC 128k SDX 64k/128k diamond express 64k blizzard 16k 1 Quote Link to comment Share on other sites More sharing options...
+ZuluGula Posted February 5, 2020 Share Posted February 5, 2020 @electrotrains I'm not sure if this is the right place to ask, but would it be possible to redesign the PCB to fit new cartridge shells from @Sikor http://sikorsoft.waw.pl/en/cartridge-cases/ Quote Link to comment Share on other sites More sharing options...
+MacRorie Posted February 5, 2020 Share Posted February 5, 2020 2 hours ago, ZuluGula said: @electrotrains I'm not sure if this is the right place to ask, but would it be possible to redesign the PCB to fit new cartridge shells from @Sikor http://sikorsoft.waw.pl/en/cartridge-cases/ How would you access the uSD card in one of those shells? Quote Link to comment Share on other sites More sharing options...
+ZuluGula Posted February 5, 2020 Share Posted February 5, 2020 (edited) 24 minutes ago, MacRorie said: How would you access the uSD card in one of those shells? You would have to file a slot in the top of shell, similar way how it's done in Ultimate cart that is installed in XE cartridge. With current pcb, the slot will be too far inside to reach. That's why I am asking for new bigger pcb where the micro SD card slot would be moved closer to the top or on a side (whatever let the cart fit all Atari computers). Right now I am going to try to use this extender with the UNO I already have. https://a.aliexpress.com/_rHyWP1 Edited February 5, 2020 by ZuluGula Quote Link to comment Share on other sites More sharing options...
+MacRorie Posted February 5, 2020 Share Posted February 5, 2020 I will give it some thought. It will definitely have to wait until I am sold out of the inventory I already have. Quote Link to comment Share on other sites More sharing options...
+ZuluGula Posted February 5, 2020 Share Posted February 5, 2020 @MacRorie, so you are the creator of current UNO pcb? I guess the same would have to be done to the Ultimate pcb since the new shells and 5mm taller. Quote Link to comment Share on other sites More sharing options...
+ZuluGula Posted February 5, 2020 Share Posted February 5, 2020 (edited) @MacRorie Edited February 5, 2020 by ZuluGula Double post Quote Link to comment Share on other sites More sharing options...
+MacRorie Posted February 5, 2020 Share Posted February 5, 2020 1 minute ago, ZuluGula said: @MacRorie, so you are the creator of current UNO pcb? I guess the same would have to be done to the Ultimate pcb since the new shells and 5mm taller. I am the producer, yes, of both. Although I am sure there are others out there by now, I am the one who is "authorized" to produce them. The Ultimate cart would have to have to wait as well, although I am closer to doing a new run of those. I would need exact specifications for the PCB and a sample of the shell before changing it, though. It would also cause the price to change on both. Quote Link to comment Share on other sites More sharing options...
+ZuluGula Posted February 5, 2020 Share Posted February 5, 2020 I should be able to send you a sample, since I'm talking with @Sikor at this moment and I'm going to get a box of them as soon as they will be available. I should know about ETA early next week. Quote Link to comment Share on other sites More sharing options...
Sikor Posted February 5, 2020 Share Posted February 5, 2020 (edited) Yes, i'll get it in nearest friday evening, so i'll send package to ZuluGula next week. ====================== I made a printed cardboard model for one of the users. For a good fit, the tile should be slightly redesigned, the two biggest problems now are: - card reader (in the housing you need to remove one of the mounting pins, which is feasible in home conditions) - the switch is very close to the rear mounting latch, here I am not sure if it will work - you would have to check it on a real board. I attach a photo of the model. Edited February 5, 2020 by Sikor more info Quote Link to comment Share on other sites More sharing options...
Wrathchild Posted February 5, 2020 Share Posted February 5, 2020 (edited) @electrotrains should be able to confirm, but if you followed the Excel article then I should think you are able to design your own PCB layout based on the connections from the breakout board? [Edit] and in doing so there could be potential for adding a second button which @flashjazzcat could take advantage of, e.g. for disk rotation. [Edit2] Another option is to move to the STM32F765VIT6 and use the extra flash space for importing 1MByte cart images from the SD card when as they don't fit in RAM, plus the extra MIPS would be great Edited February 5, 2020 by Wrathchild Quote Link to comment Share on other sites More sharing options...
Irata23 Posted March 15, 2021 Share Posted March 15, 2021 Hey there, I've seen your cart and it looks great! Will you be able to play multiplayer games? Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.