Rick Dangerous Posted August 14, 2017 Share Posted August 14, 2017 (edited) Hello everyone. My white Jaguar is under construction and I am looking to have the local vinyl/print shop make up some logos for my newly constructed console. Does anyone have a graphic of the "Jaguar" logo from the left side of the console that would print relatively to scale? Also looking for the Atari logo centered above the "64-Bit Interactive Multimedia System" text. If you could upload it, and also maybe in blue that would be much appreciated. Not sure the Jag CD is needed since replacement shells were never made for that.. Edited August 14, 2017 by travistouchdown Quote Link to comment Share on other sites More sharing options...
MayDay Posted August 15, 2017 Share Posted August 15, 2017 No idea on size, but I did create these as custom Photoshop shapes for you. The Jaguar logo is decent sized, but the text (custom bent) and Atari Logo are smaller. I'm attaching the .pngs as visual reference, and am happy to email you the photoshop files for printing if you PM it to me (not allowed to upload .psd files) 11 Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted August 15, 2017 Author Share Posted August 15, 2017 (edited) Thank you!I can take measurements on the system itself. I worry about centering the Atari logo but I will have to just take my time when applying.. Will post some pics when these are on my white JAG case. PM inbound Edited August 15, 2017 by travistouchdown Quote Link to comment Share on other sites More sharing options...
MayDay Posted August 15, 2017 Share Posted August 15, 2017 (edited) Once you know the correct size for each, you can marry the logo and text together. I didn't, so I left them separate. I was also just going off an overhead picture I found online, so the curvature of the text may need to be slightly adjusted. Email sent. Edit- They will probably need to bump the resolution to 300 and change to CYMK for printing, I'm used to working on video and forgot to change the mode when I made them. Again, very easy to do on the backend. Edited August 15, 2017 by MayDay Quote Link to comment Share on other sites More sharing options...
Sputnik2600 Posted August 21, 2017 Share Posted August 21, 2017 Will post some pics when these are on my white JAG case. Ive been thinking about doing this and can't wait to see how yours will turn out. Are you doing the standard red logo color or something more original? Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted October 3, 2017 Share Posted October 3, 2017 I made a bunch of the Jaguar logo for anyone with a clear/white shell if they want one. The design had to be tweaked after a fair bit of trial and error because the detail was so fine that the cutter was pulling up pieces of the vinyl. These are 1" x 3". 11 Quote Link to comment Share on other sites More sharing options...
UHATEIT Posted October 5, 2017 Share Posted October 5, 2017 I need one for my car haha! 1 Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted December 6, 2017 Author Share Posted December 6, 2017 Does anyone have measurements for the other two logos? My white Jag is done and having these printed up now in a royal blue. Thanks! Quote Link to comment Share on other sites More sharing options...
Guitari Posted December 8, 2017 Share Posted December 8, 2017 My white Jag is done Pics? Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted December 8, 2017 Author Share Posted December 8, 2017 I made a bunch of the Jaguar logo for anyone with a clear/white shell if they want one. The design had to be tweaked after a fair bit of trial and error because the detail was so fine that the cutter was pulling up pieces of the vinyl. These are 1" x 3". Would you be up to make these in blue? The local design/decal shop is telling me: "Unfortunately after attempting to cut this a few times, I cannot get our plotter to cut the vinyl small enough to work for this application." Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted December 9, 2017 Share Posted December 9, 2017 Would you be up to make these in blue? The local design/decal shop is telling me: "Unfortunately after attempting to cut this a few times, I cannot get our plotter to cut the vinyl small enough to work for this application." I have had a few other people ask for blue so I'm going to try to get some done soon, I've been busy with other things. It's on the to-do list don't worry I will get around to it. 2 Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted January 13, 2018 Author Share Posted January 13, 2018 Should get it back Monday, this pic is from my local modder's place. In STRONG need of a blue Jaguar Logo Apparently this project was quite a pain in the ass. Besides re-positioning the screw holes, the switch to turn the console on wasn't the same size as factory and something had to be engineered. On top of that, this NOS motherboard i got off ebay was probably on there because it was warped and the previous person figured it out. He was able to figure that out too, countersinking some screws to even it out...But I would have been screwed if I tried to DIY. Oh well, all's well that ends well. Will consider this done once I get a nice blue Jaguar sticker on it and will post another pic. 2 Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted March 1, 2019 Author Share Posted March 1, 2019 Bratwurst has come through in a pinch! I'll post a photo when these are on the Jag. 2 Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted March 1, 2019 Share Posted March 1, 2019 I feel so bad that it took this long to get around to it. Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted March 7, 2019 Author Share Posted March 7, 2019 Went on with no problems. Very happy with the results! Next a small blue Fuji logo in front i think Took the opportunity to give everything (carts slots, etc) a good cleaning while the jag and CD unit were apart. 7 Quote Link to comment Share on other sites More sharing options...
+CyranoJ Posted March 7, 2019 Share Posted March 7, 2019 That does look good. The thing under Badlands looked ok too 2 Quote Link to comment Share on other sites More sharing options...
Clint Thompson Posted March 7, 2019 Share Posted March 7, 2019 What's funny is how easily you can place the logo / text and actually aligned unlike how it was hotpadded originally by Atari. Every Jaguar I've owned with the exception of 1 had some whack alignment issue, it's like they didn't really care and the tolerance for passing was "Can you read the text?" then it's good. Never mind the 87 degree angle, it's good! They don't care, they just want to play some sweet Crescent Fresh Galaxy Game! I really like that blue on white! 1 Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted March 7, 2019 Share Posted March 7, 2019 Looks like you applied it at just the right angle/position too. Great pics. Unfortunately, this is practically the limit of what can be done for now with vinyl cutting, else I would have provided the Atari and 64-bit text too. 1 Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted March 7, 2019 Author Share Posted March 7, 2019 (edited) If they can put a man on the moon, we can cut tiny vinyl PM The BRAT if you want to blue logo treatment your white Jag. EDIT: I spent about 5 minutes positioning that Jaguar logo with the example stock jag next to it. I did NOT want to mess it up. haha Edited March 7, 2019 by travistouchdown 1 Quote Link to comment Share on other sites More sharing options...
Guitari Posted March 22, 2019 Share Posted March 22, 2019 I'm interested in a blue logo for my white Jag. Did he send you several Travis, in case you made an initial mistake? 1 Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted March 25, 2019 Author Share Posted March 25, 2019 Yes, have an extra for you if needed Guitari 1 Quote Link to comment Share on other sites More sharing options...
Guitari Posted May 2, 2019 Share Posted May 2, 2019 Hi Bratwurst did you produce the atari logo and 64 bit text?? I would take these from you in blue if you did. Perhaps they would fit on one sticker. No idea on size, but I did create these as custom Photoshop shapes for you. The Jaguar logo is decent sized, but the text (custom bent) and Atari Logo are smaller. I'm attaching the .pngs as visual reference, and am happy to email you the photoshop files for printing if you PM it to me (not allowed to upload .psd files) Quote Link to comment Share on other sites More sharing options...
Guitari Posted May 2, 2019 Share Posted May 2, 2019 Yes, have an extra for you if needed Guitari Just saw this. I got one blue from Bratwurst for my white. It looks fantastic. Quote Link to comment Share on other sites More sharing options...
Gummy Bear Posted May 2, 2019 Share Posted May 2, 2019 I wonder if gold would be possible. Gold on white would be sweet! Quote Link to comment Share on other sites More sharing options...
MayDay Posted May 2, 2019 Share Posted May 2, 2019 Any color should be possible if you can find the right printer. By the way, I think those look great Travis! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.