Evanlor Posted May 12, 2020 Share Posted May 12, 2020 Xonox Box protectors: Unless I missed it in my search no one seems to have found a Xononx double-ender box protector. I'm using Beta Max movie protectors. I can't remember where I bought them but there is a lot of wiggle room in them. Attached is pic Evan 1 Quote Link to comment Share on other sites More sharing options...
+stupus Posted May 28, 2020 Author Share Posted May 28, 2020 If I recall correct these XonoX carts fit very good in a game gear box protector. I will try and verify that tomorrow. Quote Link to comment Share on other sites More sharing options...
mooshue Posted June 2, 2020 Share Posted June 2, 2020 On 4/29/2020 at 11:26 AM, HoshiChiri said: Time for a lil' thread revival so I can pick ya'lls brains. I grabbed the Persona Endless Night collection on clearance recently- I don't know who decided 'stacked discs in a digicase' was a good idea, but I hope they got fired. Anyway- I was hoping to find a protector to fit this (it's a bit taller and wider than a standard blu-ray), but I'd love it to be a bit thicker so I can slip in a 2-disc slim blu-ray case to store the discs better. There's a lot of collector's edition the right thickness, but the height/width is wrong. Anybody got any ideas? I have that same set and dont have a protector for it just yet. I'll have to send Dan measurements for my next order and see what he has that is close and test a few out. That's pretty much how we do it, send him measurements and he gives us what is close. Sometimes it's a hit and we log it here and sometimes not and it sits in a huge box of defunct sizes lol 1 Quote Link to comment Share on other sites More sharing options...
Carlos Fandango Jr Posted June 10, 2020 Share Posted June 10, 2020 Does anyone know where I can get Activision International Edition box protectors from? e.g. the smaller Activision box versions Quote Link to comment Share on other sites More sharing options...
+stupus Posted June 10, 2020 Author Share Posted June 10, 2020 Do you mean the Activision clam shell releases from HES? Quote Link to comment Share on other sites More sharing options...
Blazing Lazers Posted June 14, 2020 Share Posted June 14, 2020 Are there any box protectors specifically for the Philips CDi US longboxes? I could use about 100 of them. Quote Link to comment Share on other sites More sharing options...
Carlos Fandango Jr Posted June 20, 2020 Share Posted June 20, 2020 (edited) On 6/10/2020 at 6:26 PM, stupus said: Do you mean the Activision clam shell releases from HES? I meant the slightly smaller Activision PAL (marked as International Edition) versions. e.g. like Kaboom in the photo.. which clearly doesn't fit snuggly in the normal size protector Edited June 20, 2020 by Carlos Fandango Jr Quote Link to comment Share on other sites More sharing options...
+stupus Posted June 23, 2020 Author Share Posted June 23, 2020 Ah, ok. I dont have any of those to check. From your picture i would guess maybe a nes of sms game box protector would likely work. But i cant say for certain without testing. If you provide box demensions one of us can probably check for possibilities. Quote Link to comment Share on other sites More sharing options...
HoshiChiri Posted October 16, 2020 Share Posted October 16, 2020 I'm hoping to find a protector for my copy of Solatorobo, but everything is juuust a bit off: the Kid Icarus Uprising box is too short, but the other 3DS games I can find that came with CDs all used paper covers instead of the jewel case on the Solatorobo disc, so they're too narrow. The DS/3DS games that had other goodies are all way too side and/or a bit short. Anybody got an idea? Quote Link to comment Share on other sites More sharing options...
+stupus Posted February 20, 2021 Author Share Posted February 20, 2021 I dont like endorsing this guy but happiestsellerever now has protectors that fit the 3 epyx titles for the 2600. They are nice quality too. These fit alot of other things too that use that size. https://www.ebay.com/itm/292655633590 Quote Link to comment Share on other sites More sharing options...
phattyboombatty Posted March 1, 2021 Share Posted March 1, 2021 On 2/20/2021 at 3:57 PM, stupus said: I dont like endorsing this guy but happiestsellerever now has protectors that fit the 3 epyx titles for the 2600. They are nice quality too. These fit alot of other things too that use that size. https://www.ebay.com/itm/292655633590 I just happened to notice this, as I'm about to order more from retroprotection.com this evening. So, are these Epyx (2600) boxes the same dimensions as the Epyx (ColecoVision) boxes? I have two Epyx titles for my CV: Gateway to Apshai and Jumpan Junior. They are an odd size. I measure 5-13/16" x 8-13/16" x 1-1/8". This eBay seller might have deliberately omitted the dimensions. I certainly don't see them in the listing. Quote Link to comment Share on other sites More sharing options...
+stupus Posted March 1, 2021 Author Share Posted March 1, 2021 I havent checked them on the coleco epyx titles yet. But i want to say the coleco ones are a bigger box. They did fit a epyx atari 400 game. I have a few more things to check them on. I will do so and report back. Quote Link to comment Share on other sites More sharing options...
+stupus Posted March 1, 2021 Author Share Posted March 1, 2021 So just checked them on the colecovision 2 piece epyx boxes. While they do go in, they bulge a bit as they are really slightly too big. Probably because they are 2 piece boxes. I am guessing the 1 piece epyx coleco boxes would fit in them correct. But i dont have those out handy right now to check. I also just found the vic 20 game box protectors by buzzandbingo on ebay fit the coleco fisher price and small cardboard spinnaker boxes pretty nicely. Exact height and thickness and about a half inch wider than they need to be. This isnt noticable then on the shelf though....and only thing so far i have found close on those sizes. 1 Quote Link to comment Share on other sites More sharing options...
+stupus Posted March 19, 2021 Author Share Posted March 19, 2021 The big box intellivision homebrew games by cote fit good in the atari 2600 adult protectors from retroprotection.com Also the premium big silver box games for opcodes homebrews fit perfect in them too. And the small box maria inty homebrew by cote fits in the game gear game protectors from retroprotection.com 1 1 Quote Link to comment Share on other sites More sharing options...
Defender II Posted July 1, 2021 Share Posted July 1, 2021 On 11/1/2019 at 1:32 PM, mooshue said: https://drive.google.com/open?id=1FHcg00OEAc5d5Esa3tuBO2_mzXKF0gAWtLRuXBIr6-4 Started a Google Drive doc that we can all start contributing to and sharing with others who may not have an atariage account. Let me know what you think about that format. Only done with 2600 and 5200 so far, but want to include everything all the way up to current gen systems. @stupus that Fire Emblem Echoes 3ds box fits Bounty Bob perfectly. Allows the hang tab to be fully extended. Can you please add the dimensions of the boxes that fit in them? That way if we have similarly sized boxes we’ll know which to buy. If you sort the list by box sizes, all we would need to do is measure our box then find a protector on the list that is closest and order from the recommended seller. 1 Quote Link to comment Share on other sites More sharing options...
+sixersfan105 Posted August 11, 2021 Share Posted August 11, 2021 Attention Philips CD-i fans: Buzz & Bingo's Moon Circus now carries box protectors that fit the USA longbox releases. Available here. Looking at you @Blazing Lazers ? They also sell protectors for the jewel case + slipcover CD-I releases, available here. The former interests me much more, however, from a protection (and collecting) standpoint. 1 1 Quote Link to comment Share on other sites More sharing options...
+stupus Posted August 11, 2021 Author Share Posted August 11, 2021 16 minutes ago, sixersfan105 said: Attention Philips CD-i fans: Buzz & Bingo's Moon Circus now carries box protectors that fit the USA longbox releases. Available here. Looking at you @Blazing Lazers ? They also sell protectors for the jewel case + slipcover CD-I releases, available here. The former interests me much more, however, from a protection (and collecting) standpoint. Thats awesome! I will have to pick up a few for my small cdi collection 2 Quote Link to comment Share on other sites More sharing options...
Cold Soup Posted August 31, 2021 Share Posted August 31, 2021 On 10/16/2020 at 8:38 AM, HoshiChiri said: I'm hoping to find a protector for my copy of Solatorobo, but everything is juuust a bit off: the Kid Icarus Uprising box is too short, but the other 3DS games I can find that came with CDs all used paper covers instead of the jewel case on the Solatorobo disc, so they're too narrow. The DS/3DS games that had other goodies are all way too side and/or a bit short. Anybody got an idea? I think I found a solution. It's not exactly perfect, but it may fit pretty close. The 4mb ram games on Sega Saturn have a very similar box dimension and the box protector for that is readily available on Aliexpress. Hope this helps your Solatorobo box protector issue or anyone else with a similar predicament. 1 Quote Link to comment Share on other sites More sharing options...
Cold Soup Posted September 14, 2021 Share Posted September 14, 2021 On 8/30/2021 at 8:00 PM, Cold Soup said: I think I found a solution. It's not exactly perfect, but it may fit pretty close. The 4mb ram games on Sega Saturn have a very similar box dimension and the box protector for that is readily available on Aliexpress. Hope this helps your Solatorobo box protector issue or anyone else with a similar predicament. Here’s an update. It does indeed fit very well. I have very little wiggle going on. I recommend the 4mb Saturn ram cart cases for Solatorobo owners. Hope this helped. 1 Quote Link to comment Share on other sites More sharing options...
+stupus Posted September 14, 2021 Author Share Posted September 14, 2021 Gamegear box protectors i have found fit game.com box games perfect. They also fit some of the pc50x pong system game boxes. Quote Link to comment Share on other sites More sharing options...
+sixersfan105 Posted December 30, 2021 Share Posted December 30, 2021 It's not a perfect fit, but standard Intellivision (tall) box protectors from Retroprotection, available here, fit Mattel HyperScan Game Packs fairly well. Just under a quarter inch gap on either side, height is maxed out and bulges just a bit, but no movement within the case so the gap isn't very consequential. 1 Quote Link to comment Share on other sites More sharing options...
ghsqb Posted July 30, 2022 Share Posted July 30, 2022 Is the google drive link dead for anyone else, or is it just me? 1 Quote Link to comment Share on other sites More sharing options...
+stupus Posted July 30, 2022 Author Share Posted July 30, 2022 Yes it is for me too. Wish i had known he was going to remove it. I would have downloaded it and hosted it on my Google drive. I don't think i have a copy...I don't know if anyone else does? Quote Link to comment Share on other sites More sharing options...
Evanlor Posted October 13, 2022 Share Posted October 13, 2022 Has anyone figured out a good protector for the Atari Back to School pak? Thanks! 1 Quote Link to comment Share on other sites More sharing options...
+KylJoy Posted October 19, 2022 Share Posted October 19, 2022 What about the Dreamcast games Alien Front or Seaman in their cardboard box with microphone? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.