Jump to content
discgolfer72

working on a nano peb 3d case

Recommended Posts

haven't tried screws yet, as there's no holes in the "case" just the lid..

 

Greg

 

 

I just ran some screws in really didn't need pre done holes

I used these I had lying around (just the screws not the inserts)

 

on my final one I'm using I did use a tiny drill bit to pre drill the holes

 

if someone has the version 2 peb and can snap some pics looks like the opening for the power is to big to the right for version 1 peb

if I can see a version 2 then I can shrink it some so the opening is not quite so big on the universal case

 

ps my printer seems to have cloned itself bigger lol just built a anet a8

and have an even bigger one on the way now also ( lol I hate having to wait for prints with multiple parts and want to print some larger cosplay stuff)

post-63035-0-33878500-1521409444_thumb.jpg

post-63035-0-20916900-1521409454_thumb.jpg

post-63035-0-46063500-1521409466_thumb.jpg

  • Like 1

Share this post


Link to post
Share on other sites

I had some issues with ABS warping pretty bad, but wound up switching to PLA and my print finished about 1 hour ago. I fully assembled it in the NanoPEB (attached to a speech synthesizer) and it worked well. I did remove the sliding clips on the speech synthesizer such that it would fit properly. I have a few SS's, so it wasn't a big deal for me. For others, it may be. But, it worked great! I took some pictures, but not sure how to upload/post them here.

Share this post


Link to post
Share on other sites

Ah ha, FireFox let me post but Chrome wasn't allowing it. Here are the pics. from my 3D print :) I used a drill to create the rest of the holes needed for the screws. I drilled 4, but only assembled 2 screws for now. Thank you so much discgolfer72 for your model!!!!

post-63846-0-39330300-1521439684_thumb.jpeg

post-63846-0-22570000-1521439685_thumb.jpeg

post-63846-0-22259400-1521439686_thumb.jpeg

Edited by jonecool

Share this post


Link to post
Share on other sites

Ah ha, FireFox let me post but Chrome wasn't allowing it. Here are the pics. from my 3D print :) I used a drill to create the rest of the holes needed for the screws. I drilled 4, but only assembled 2 screws for now. Thank you so much discgolfer72 for your model!!!!

no problem glad its working for everyone

 

my first printer the mini does not print abs(no heated bed) and have yet to try abs on my new one

 

I guess abs would make for a longer lasting case but pla seems to work fine for me

 

 

at this point I'm calling the version 1 only case finished

 

 

for the universal case that will fit v1 or 2

from jonecoool's and arcadeshoppers pics it looks like I need to reduce the opening for the power cable a bit its def to big to the right of the v1 power jack)

 

if someone that has a version 2 peb wants to print the case so I can verify how much smaller in need to make the opening that would be a big help

 

then once I get that one honed in ill pop them up on thingiverse so hopefully everyone can find it if needed

 

now that I have 2 3d printers and a 3rd on the way if anyone needs a case printed I'm willing to print one for cost of materials and shipping

Share this post


Link to post
Share on other sites

sorry all have yet to get the universal one up on thingiverse

and have not done any more tinkering with the case

been a bit busy with work at the store and my down time has been focused on building my printer setup lol

 

one more enclosure to finish and one more printer to build

 

and then ill be set lol

 

I have also started messing around with meshmixer and its really helped to smooth out the designs and make them print much nicer

 

 

post-63035-0-64482200-1523891720_thumb.jpg

post-63035-0-42615600-1523891748_thumb.jpg

post-63035-0-19214600-1523892299_thumb.jpg

  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...