walterg74 Posted May 7, 2018 Share Posted May 7, 2018 Hey all, wondering if any repair experts can help me out with this one... I have a colecovision that had controller port symptoms, where for example in DK, fire button would activate on game start, and then not respond, although rest of directions/etc worked. Read that it was a faulty SN74LS541N, associated to the faulty port and attempted to change it. Well, I must have done something wrong, because now I get no startup screen at all, just black... I also noticed that the newly changed chip gets hot... not really sure why, or what this one has to do with video, unless I messed something else up. Appreciate any help. Thanks. Quote Link to comment Share on other sites More sharing options...
Bmack36 Posted May 7, 2018 Share Posted May 7, 2018 Make sure the chip orientation is correct and follows the silkscreen on the board. The two 541s do not face the same direction. 2 Quote Link to comment Share on other sites More sharing options...
walterg74 Posted May 7, 2018 Author Share Posted May 7, 2018 Make sure the chip orientation is correct and follows the silkscreen on the board. The two 541s do not face the same direction. F***, Seriously?? I actually made sure to orient it the same as the other one! Quote Link to comment Share on other sites More sharing options...
fiddlepaddle Posted May 7, 2018 Share Posted May 7, 2018 You see the little dip on the white outline of the chip on the board? That shows you the orientation. Quote Link to comment Share on other sites More sharing options...
walterg74 Posted May 7, 2018 Author Share Posted May 7, 2018 You see the little dip on the white outline of the chip on the board? That shows you the orientation. Yeah, that or having looked at how the old one was, or looking at an image on google, or just not being stupid.. Anywho, took the chip out and reversed it, and it works again (and the issue is fixed). Thanks. 3 Quote Link to comment Share on other sites More sharing options...
CrazyBoss Posted May 7, 2018 Share Posted May 7, 2018 ahhhhh and you didn socket them. ??? Quote Link to comment Share on other sites More sharing options...
jblenkle Posted May 7, 2018 Share Posted May 7, 2018 Late to the party, but that would have been my first guess...you put the chip in the wrong direction. I did that many years ago replacing the sound chip on my ColecoVision and boy did that sucker get hot!!! Quote Link to comment Share on other sites More sharing options...
walterg74 Posted May 7, 2018 Author Share Posted May 7, 2018 Late to the party, but that would have been my first guess...you put the chip in the wrong direction. I did that many years ago replacing the sound chip on my ColecoVision and boy did that sucker get hot!!! Serves me right for not looking. Just assumed it went in like its pair. It’s even drawn on the PCB for crying out loud... Quote Link to comment Share on other sites More sharing options...
walterg74 Posted May 7, 2018 Author Share Posted May 7, 2018 ahhhhh and you didn socket them. ??? Saw.... kit...? 1 Quote Link to comment Share on other sites More sharing options...
walterg74 Posted May 10, 2018 Author Share Posted May 10, 2018 Hey guys, since I already had the console open, I installed a video mod in my CV, and the picture looks nice and defined, however, the colors are not completely right.., it is too purple (very noticeable on the game select screen). Anyone have any clue how to correct it..? (The mod kit is the one from retrofixes) (Not sure if I should open a new/separate thread for this..) Quote Link to comment Share on other sites More sharing options...
mobiusstriptech Posted May 10, 2018 Share Posted May 10, 2018 Most of the composite mods out there don't get the colors exactly right. Your best bet is RGB and I am not saying this just because I sell them, simply because it is honestly the best way to get everything displaying correctly. 1 Quote Link to comment Share on other sites More sharing options...
Bmack36 Posted May 10, 2018 Share Posted May 10, 2018 Only issue with the RGB (F18a has the same issue) is that the expansion video for the atari expansion module requires a separate video connection. The composite mod works for both the colecovision and the expansion video. 1 Quote Link to comment Share on other sites More sharing options...
mobiusstriptech Posted May 12, 2018 Share Posted May 12, 2018 That is very true bmack36. Quote Link to comment Share on other sites More sharing options...
walterg74 Posted May 12, 2018 Author Share Posted May 12, 2018 Only issue with the RGB (F18a has the same issue) is that the expansion video for the atari expansion module requires a separate video connection. The composite mod works for both the colecovision and the expansion video.Well, another knowledgeable fellow has also given me a few tips to try, coming down to tweak something on the circuit or simply adjusting tint on the tv. Honestly since the picture is clear and adjusting tint fixes the displacement, I think I will just use it like this which looks great to me (yes I know RGB is better,maybe in the future Ill switch to that). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.