EvilDragon17 Posted October 11, 2018 Share Posted October 11, 2018 (edited) A lot of here probably already know about that adaptor, but as it has now been tested thoroughly and is now in production, I thought I'd open up a new thread as well. Please let me know if you have any further questions - and I'll try to answer them as good as possible. What is the ColecoPlug? The ColecoPlug is a small adapter which you can plug into your original Colecovision (where you usually plug in the original power supply). This small plug enables you to use a standard USB-C power supply (like the ones used with smartphones) to power your Colecovision (or any accessories that use the same power supply as well). As it's hard these days to find power supplies for the Colecovision, this is a great way to keep your system alive. And it works worldwide, regardless the region! How does it work? The adapter has an up-converter as well as a voltage stabilizer included.It uses the 5V it gets from the USB power supply, stabilizes it and creates stable 5V, -5V and +12V from it which powers the Colecovision. As the Colecovision needs quite a bit of power, you need to use a proper USB power supply as well. Any power supply providing 2A or higher should work without any issues. Thanks to the voltage stabilized, even cheap USB power supplies that provide less than 5V work fine - but it's still suggested to use a good one. Has this been tested? Yes, of course! Multiple users here from the AtariAge boards have received prototypes and tested them with various Colecovisions. Modded and unmodded, with accessories and without and from various regions. It works without problems. Also, we presented it at our booth at the GamesCom in Germany where it powered a Colecovision 10 hours a day for 5 days. No crash, nothing! CE / FCC testing has also been finished already. In case you're interested in the testing results, I've attached them to this post.You can also see a quick video of an early prototype here: How much does it cost and where can I get it? It's around 35 EUR without VAT and excluding shipping, and you'll get a bit off when you order 2 or more adapters. You can preorder it here: https://www.dragonbox.de/en/703-colecoplug-usb-power-supply-for-the-colecovision-preorder-ac-adaptors.html How many will be produced? We're planning a production run of 500, however, if there is a lot of demand, we'll likely produce more. Got questions? Let me know here em-6569.pdf Edited October 11, 2018 by EvilDragon17 8 Quote Link to comment Share on other sites More sharing options...
SpotAnime Posted October 11, 2018 Share Posted October 11, 2018 Very nice! Just pre-ordered two! Just curious, what kind of USB cable should I get for this? Do I need to worry about getting one with certain specifications? Quote Link to comment Share on other sites More sharing options...
EvilDragon17 Posted October 11, 2018 Author Share Posted October 11, 2018 Very nice! Just pre-ordered two! Just curious, what kind of USB cable should I get for this? Do I need to worry about getting one with certain specifications? Not really, any USB-C cable should work. As usual, avoid the really cheap Chinese ones - if it isn't able to provide enough power to the adapter, it won't work. That's why we used USB-C. Most cables are meant to be used with smartphones that eat a lot of power, so you won't have issues with them. Quote Link to comment Share on other sites More sharing options...
EvilDragon17 Posted October 11, 2018 Author Share Posted October 11, 2018 (edited) BTW: In case anyone who ordered only had expensive shipping services available: I now also added untracked shipping via postal mail. This is slower, but a lot cheaper (it does cost 3,70 EUR worldwide!) Let me know if you'd like to switch to the cheaper shipping costs. Edited October 11, 2018 by EvilDragon17 Quote Link to comment Share on other sites More sharing options...
phattyboombatty Posted October 11, 2018 Share Posted October 11, 2018 I am blown away by the ingeniousness of this! For years, many people have tried to recreate the ColecoVision power supply with bulky, noisy PC power supplies. Some have come up with incredible internal power supplies which are very nice. But you and your team sir, have thought outside the box! Fantastic job with your ingenuity, as this makes it easy for ANYONE to make their classic ColecoVision PORTABLE! Furthermore, we never have to worry about burning out our coveted classic CV power supplies again, as USB chargers are UBIQUITOUS! Nice work man. 1 Quote Link to comment Share on other sites More sharing options...
jblenkle Posted October 11, 2018 Share Posted October 11, 2018 So is there a shipping cost? I went through the motions of adding one to my cart just to see if I could calculate the lower costing one you said you added and it said Free Shipping. I didn't go any further than just adding it to my cart so I don't know if that would change later in the process. BTW: In case anyone who ordered only had expensive shipping services available: I now also added untracked shipping via postal mail. This is slower, but a lot cheaper (it does cost 3,70 EUR worldwide!) Let me know if you'd like to switch to the cheaper shipping costs. Quote Link to comment Share on other sites More sharing options...
nick3092 Posted October 11, 2018 Share Posted October 11, 2018 So is there a shipping cost? I went through the motions of adding one to my cart just to see if I could calculate the lower costing one you said you added and it said Free Shipping. I didn't go any further than just adding it to my cart so I don't know if that would change later in the process. Yes. My order said the same thing, free shipping until I got further in the cart. In a nutshell, your options are going to be UPS or Fedex, each with a shipping cost of around the cost of the power plug itself (faster and traceable). Or standard post, which is less than $5 usd, but slower and no tracking. Quote Link to comment Share on other sites More sharing options...
atari-dna Posted October 24, 2018 Share Posted October 24, 2018 For those who ordered, how is the performance so far? Interested to hear the feedback Quote Link to comment Share on other sites More sharing options...
berighteous Posted October 27, 2018 Share Posted October 27, 2018 I ordered 2 on the 10th/ When will they be shipping? Quote Link to comment Share on other sites More sharing options...
Mike Harris Posted October 28, 2018 Share Posted October 28, 2018 Now make one for the ADAM.I think it would draw too much power for the data drives. Quote Link to comment Share on other sites More sharing options...
rjchamp3 Posted October 29, 2018 Share Posted October 29, 2018 I would like one ur site link don't work? Quote Link to comment Share on other sites More sharing options...
NIAD Posted October 30, 2018 Share Posted October 30, 2018 Now make one for the ADAM. I think it would draw too much power for the data drives. Didn't you say in another thread that you just acquired a minty ADAM that will remain in the box as you continue to use emulation for your ADAM experience? Just asking. Quote Link to comment Share on other sites More sharing options...
Mike Harris Posted November 1, 2018 Share Posted November 1, 2018 I did.I also got hosed on the manuals and the guy says if he finds them...He didn't say anything about missing manuals when he defined the product as never touched, unused and in near mint condition. That said, that will be shelved on display in my collection while I use an every day unit. Quote Link to comment Share on other sites More sharing options...
rjchamp3 Posted November 1, 2018 Share Posted November 1, 2018 I did. I also got hosed on the manuals and the guy says if he finds them...He didn't say anything about missing manuals when he defined the product as never touched, unused and in near mint condition. That said, that will be shelved on display in my collection while I use an every day unit. I would like to order but ur link don't work Quote Link to comment Share on other sites More sharing options...
berighteous Posted November 20, 2018 Share Posted November 20, 2018 When will these be shipping? Quote Link to comment Share on other sites More sharing options...
towmater Posted November 22, 2018 Share Posted November 22, 2018 Dave Jones, where are you when we need you? Quote Link to comment Share on other sites More sharing options...
vazquezrick Posted November 24, 2018 Share Posted November 24, 2018 I ordered 2 on the 10th/ When will they be shipping? I also ordered one in the 10th. Quote Link to comment Share on other sites More sharing options...
NIAD Posted November 24, 2018 Share Posted November 24, 2018 The preorder opened just 40 days ago and production is not an overnight process. Give them a little time please before posting all the "where's my product" messages... this is the way of the CV Homebrew scene and has been for over a decade. 1 Quote Link to comment Share on other sites More sharing options...
vazquezrick Posted November 25, 2018 Share Posted November 25, 2018 I also ordered one on the 10th. Quote Link to comment Share on other sites More sharing options...
SiLic0ne t0aD Posted November 25, 2018 Share Posted November 25, 2018 I can't wait till the next batch comes in.. I'll definitely be ordering a couple! My internal power supply mod is a little noisy, so these should do the trick. Quote Link to comment Share on other sites More sharing options...
EvilDragon17 Posted November 27, 2018 Author Share Posted November 27, 2018 Aaaand here is an update: PCBs should be finished early December, boxes will arrive here December 8th, cases will be finished December 6th (all details according to the manufacturer). So we're in time for christmas! We will ship them as soon as we receive them, but we can't assure you that it will arrive everywhere in the world before christmas if you've chosen the cheapest shipping service. We're getting there 2 Quote Link to comment Share on other sites More sharing options...
berighteous Posted November 30, 2018 Share Posted November 30, 2018 Thanks! Quote Link to comment Share on other sites More sharing options...
vazquezrick Posted December 1, 2018 Share Posted December 1, 2018 Than you for the update. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
EvilDragon17 Posted December 4, 2018 Author Share Posted December 4, 2018 Shells have arrived, now I'm only waiting for the boxes and PCBs Quote Link to comment Share on other sites More sharing options...
Mika73 Posted December 4, 2018 Share Posted December 4, 2018 Prize 42€ + shipping? I read 35€ somewhere. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.