E474 Posted January 1, 2019 Share Posted January 1, 2019 Hi, I am trying to create bad sectors on a track using the Editor part of the Archiver/Editor (version 3.03). I have the docs for version 1 (from the Internet Archive), but pressing the B key on a sector in a track loaded into the Editor gives different characters than those described on page 5-8 (see attached PDF). The characters I get are: r shaped character, s, D, |, |-, p, d Anyone know how to get the characters described in the original manual, or what the new characters mean (I think s means short sector, but that's only because I don't know how to set this up, and the Editor complains when I try and write this sort of sector)? If anyone has a scan of the manual for 3.03, that would be really appreciated. Short term work-around would be to use version 1.? of the Archiver/Editor, but I am still interested in what these new characters mean, and also how to get the same effects as the old version. Also, the option line has changed a bit, I now get: S:1 D:1 R:0,27 V- L+ C+ SK- F+ S+ P+ I am guessing SK is Skew, but no idea what P+ is, or where B+ went. One thing to note, this is running on a drive with a BitWriter installed, just in case the Archiver/Editor behaves differently with this upgrade. I want to create a test disk with as many different types of protection on it as possible, and as far as I know, the Archiver/Editor is the only way to do this. Any help would be appreciated. AE_B_commands.pdf Quote Link to comment Share on other sites More sharing options...
+kheller2 Posted January 2, 2019 Share Posted January 2, 2019 Anything of use here? http://www.nleaudio.com/css/products/Sa_Upd.htm 8. Bad sector symbols = Deleted Data Mark sector (right angles s = Short sector !lower-case s) D = Double Density sector !upper-case Dl | = CRC Error sector (vertical line) =Deleted rata hark + CRC Error sector (sideways T) b. p = Phantom sector (lower-case pi7. d = Deleted Data Mark + Phantom sector (lower-case d) and... https://sites.google.com/site/ataripal/superarchiver Quote Link to comment Share on other sites More sharing options...
E474 Posted January 2, 2019 Author Share Posted January 2, 2019 Yes. Actually I got a very similar, if not identical document with my BitWriter, I just didn't notice this section. Am still curious how the bad sector types listed in the PDF are created with the 3.03 version, but I think I will try creating them with the Archiver/Editor 1.2, then see what 3.03 displays. Also intend to sit down and read the BitWriter document, especially before posting any more questions on this. Thanks for the help! 1 Quote Link to comment Share on other sites More sharing options...
Zarxx Posted January 11, 2019 Share Posted January 11, 2019 http://atariage.com/forums/topic/275185-super-archiver-v303-documentation-addendum/?p=3954127 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.