doctor_x Posted October 29, 2019 Share Posted October 29, 2019 Not mine just sharing due to the level of rarity... https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F223723269772 3 1 Quote Link to comment Share on other sites More sharing options...
Lastic Posted November 1, 2019 Share Posted November 1, 2019 On 10/29/2019 at 2:44 AM, doctor_x said: Not mine just sharing due to the level of rarity... https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F223723269772 Thanks a lot for sharing this, my very first computer was sadly no Atari but a Colecovision ADAM which ran CP/M. It's the first OS that I started with and as such ATR8000 is shipping to Belgium 6 Quote Link to comment Share on other sites More sharing options...
mimo Posted November 1, 2019 Share Posted November 1, 2019 Just now, Lastic said: Thanks a lot for sharing this, my very first computer was sadly no Atari but a Colecovision ADAM which ran CP/M. It's the first OS that I started with and as such ATR8000 is shipping to Belgium Congratulations! 1 Quote Link to comment Share on other sites More sharing options...
manterola Posted November 1, 2019 Share Posted November 1, 2019 Congrats Lastic!!!! That looks like a very nice piece of hardware.. Quote Link to comment Share on other sites More sharing options...
+Nezgar Posted November 1, 2019 Share Posted November 1, 2019 $360 USD. ? Continuing to kick myself for dropping one off for electronics recycling 18 years ago... 1 Quote Link to comment Share on other sites More sharing options...
Lastic Posted November 1, 2019 Share Posted November 1, 2019 1 minute ago, manterola said: Congrats Lastic!!!! That looks like a very nice piece of hardware.. It will travel with me to next year's Fujiama . 1 Quote Link to comment Share on other sites More sharing options...
ClausB Posted November 1, 2019 Share Posted November 1, 2019 4 minutes ago, Nezgar said: $360 USD. ? Continuing to kick myself for dropping one off for electronics recycling 18 years ago... I'll kick you too for doing that! 1 Quote Link to comment Share on other sites More sharing options...
ClausB Posted November 1, 2019 Share Posted November 1, 2019 6 minutes ago, Lastic said: It will travel with me to next year's Fujiama . Congrats! May I suggest a DT-80 cart and a monichrome monitor? (Just don't let Mathy see that.) Quote Link to comment Share on other sites More sharing options...
Lastic Posted November 1, 2019 Share Posted November 1, 2019 1 minute ago, ClausB said: Congrats! May I suggest a DT-80 cart and a monichrome monitor? (Just don't let Mathy see that.) Now I'm curious why Mathy may not see it Quote Link to comment Share on other sites More sharing options...
manterola Posted November 1, 2019 Share Posted November 1, 2019 Now you can brag about it in the "What's the latest Atari related thing(s) you've bought on ebay?" thread... I will try to brag about my new genesis controller and trackball, but really I see no competition against an ATR8000... 1 1 Quote Link to comment Share on other sites More sharing options...
+Nezgar Posted November 1, 2019 Share Posted November 1, 2019 Still have these 2 disks, if anyone wants for cost of postage. Probably common disks though? 1 Quote Link to comment Share on other sites More sharing options...
AtariGeezer Posted November 1, 2019 Share Posted November 1, 2019 2 minutes ago, Nezgar said: Still have these 2 disks, if anyone wants for cost of postage. Probably common disks though? Interested 1 Quote Link to comment Share on other sites More sharing options...
doctor_x Posted November 1, 2019 Author Share Posted November 1, 2019 please snap pics of the innards for us all for documentation purposes... Quote Link to comment Share on other sites More sharing options...
Alfred Posted November 1, 2019 Share Posted November 1, 2019 3 hours ago, Nezgar said: Still have these 2 disks, if anyone wants for cost of postage. Probably common disks though? mm, I doubt it, I didn't get any disks with either of my ATR-8000's. Quote Link to comment Share on other sites More sharing options...
+Nezgar Posted November 7, 2019 Share Posted November 7, 2019 The disks are on their way to @AtariGeezer but I managed to make a fresh ATR of the MyDOS disk before going in the mail in case these are not archived / out there. I forgot there was an alternate version on the backside as well. V3.013 had a bad sector 581, but a 2nd try with disk wizard resulted in a copied sector that appears to have no errors. It's allocated to a text file, and I don't see any garbled data.. Sector link appears sequential with the previous and next sectors.. Maybe AtariGeezer can see if the CP/M disk is readable / copyable from CP/M... I no longer have to look at these disks to remind me of my guilt lol. Cheers! SWP PN.MYDOS D#04-19-84 MYDOS V3.013 FOR THE ATR8000.atr SWP PN.MYDOS D#04-19-84 MYDOS V3.18 FOR THE ATR8000.atr 4 Quote Link to comment Share on other sites More sharing options...
Lastic Posted November 8, 2019 Share Posted November 8, 2019 On 11/1/2019 at 10:28 PM, doctor_x said: please snap pics of the innards for us all for documentation purposes... Will do , it's crossing the ocean at the moment. Quote Link to comment Share on other sites More sharing options...
Lastic Posted November 8, 2019 Share Posted November 8, 2019 On 11/1/2019 at 4:40 PM, ClausB said: Congrats! May I suggest a DT-80 cart and a monichrome monitor? (Just don't let Mathy see that.) Have been reading a lot already but not sure on the monitor ? Since I also have an Atari ST which has hi-res mode only in monochrome, it might be worthy to invest in a monitor that can be used by both machines. Quote Link to comment Share on other sites More sharing options...
Lastic Posted November 13, 2019 Share Posted November 13, 2019 And here it is, of course I just realise that my 110V to 220V converter was lend out and never returned to me, aargh ... First look there is no board underneath so no CO-POWER motherboard , oh well, I wasn't planning on running MSDOS anyhow (yet ) Only thing that came shipped with it was the manual, luckily still got a US powercord laying around now only need to get a 110/220V converter. In the meanwhile I've gathered all 58 topics discussing the ATR8000 and am reading thru them. The thing that has been intriguing me the most , is the SASI/SCSI option. Has anybody used this in combination with SCSI2SD ? http://shop.codesrc.com 2 Quote Link to comment Share on other sites More sharing options...
ClausB Posted November 13, 2019 Share Posted November 13, 2019 It has 64K RAM. Congrats! 1 Quote Link to comment Share on other sites More sharing options...
Lastic Posted November 13, 2019 Share Posted November 13, 2019 6 minutes ago, ClausB said: It has 64K RAM. Congrats! Thanks, now off to get a 110V/220V adapter. In the meanwhile I've looked in my stock of old cables and found the following. So it has the floppy connector that the ATR8000 has , the grey one in the middle and the IDE one on the other end. To my understanding one may not use the twisted floppy cables ( I have a few of those also ) If I disconnect my XF551 from it's controller but keep it powered via it's PSU, should I be able to use the XF551 as a boot floppy drive on the ATR8000 ? Quote Link to comment Share on other sites More sharing options...
Lastic Posted November 13, 2019 Share Posted November 13, 2019 (edited) FML came home with a travel adapter which converts the plug but not the voltage, aargh ... New order placed for a VOLTAGE convertor. Delivery tomorrow. Edited November 13, 2019 by Lastic Quote Link to comment Share on other sites More sharing options...
a8isa1 Posted November 13, 2019 Share Posted November 13, 2019 Lastic, congratulations on getting an ATR8000. (Sorry to hear about the travel adapter) I noticed your ATR8000 has one difference from mine. The card edge connectors on yours are keyed. There's a partial test you can do if you don't have disk drives connected. A printer is not necessary. In Atari BASIC type LPRINT. If you get a timeout error (138) then the ATR8000 is not responding. If you simply see "READY" then the print spooler function of the ATR8000 is running. Quote Link to comment Share on other sites More sharing options...
Lastic Posted November 13, 2019 Share Posted November 13, 2019 13 minutes ago, a8isa1 said: Lastic, congratulations on getting an ATR8000. (Sorry to hear about the travel adapter) I noticed your ATR8000 has one difference from mine. The card edge connectors on yours are keyed. There's a partial test you can do if you don't have disk drives connected. A printer is not necessary. In Atari BASIC type LPRINT. If you get a timeout error (138) then the ATR8000 is not responding. If you simply see "READY" then the print spooler function of the ATR8000 is running. Thanks for the hint, I picked that up in the 58 topics I'm still reading Well once the 110/220V convertor arrives tomorrow, I'll be able to check it further, the seller did show that it powered up (power LED working) . Am I correct that I can use my XF551 to boot CP/M ? Well first have to figure out how to get a copy of it onto a floppy. Still processing all the topics to understand what can and cannot be connected to the ATR. Quote Link to comment Share on other sites More sharing options...
a8isa1 Posted November 13, 2019 Share Posted November 13, 2019 (edited) 2 hours ago, Lastic said: Thanks for the hint, I picked that up in the 58 topics I'm still reading Well once the 110/220V convertor arrives tomorrow, I'll be able to check it further, the seller did show that it powered up (power LED working) . Am I correct that I can use my XF551 to boot CP/M ? Well first have to figure out how to get a copy of it onto a floppy. Still processing all the topics to understand what can and cannot be connected to the ATR. The ATR8000 cannot access SIO based Atari disk drives, so no, you can't use an XF551 to boot CP/M. Also, no one has managed to make usable ATR8000 boot disks from image files, such as those from 22disk and teledisk. I believe one sector on one track is shorter than the other sectors, making copying problematical on a personal computer. ricortese (and others) documented the issue. However, once you have booted CP/M, with the necessary support files one can access data disks created from imaged created by the above mentioned utilities. The generated disks may work as is or a new disk definition may be required. I no longer remember how this done but it is part of the CP/M basics. Instructions should be easy to find. I believe, there was an addendum sheet to the ATR8000 CP/M Supplement. Fortunately for all ATR8000 owners sup8pdct (sp?) provided a workaround for not having CP/M bootdisks here. Now ATR8000 owners can create a boot disk and copy files over to it, and reconstruct a complete system disk. -SteveS Edited November 13, 2019 by a8isa1 Quote Link to comment Share on other sites More sharing options...
BillC Posted November 13, 2019 Share Posted November 13, 2019 (edited) 5 hours ago, Lastic said: So it has the floppy connector that the ATR8000 has , the grey one in the middle and the IDE one on the other end. To my understanding one may not use the twisted floppy cables ( I have a few of those also ) If you want to connect 5-1/4" FDD mechanisms to the ATR8000 you will likely need a cable with at least 2 34-conductor card edge connectors. The 34-pin connectors were used mainly for 3-1/2" mechanisms and mainboard FDD interface. You may be able to use the cable shown to connect a 3-1/2" mechanism. 34-conductor cables are also NOT IDE, that's a HDD interface standard which uses 40-conductor or 80 conductor(Ultra 66+) cables. Edited November 13, 2019 by BillC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.