GenetixJ Posted March 1, 2020 Share Posted March 1, 2020 I hooked up the AV board. TV doesn’t recognize any signals. With the multimeter I get 5v from the 5v wire. I get 2.3v from video and 7.3 from audio. Attached are pictures. I could really use help here. Quote Link to comment Share on other sites More sharing options...
emmanuelf Posted March 1, 2020 Share Posted March 1, 2020 Hook up the ground to your Video and Audio RCA connectors. 2 Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted March 1, 2020 Share Posted March 1, 2020 Did you insulate the underside of the video board before putting it on top of the RF modulator? Quote Link to comment Share on other sites More sharing options...
GenetixJ Posted March 2, 2020 Author Share Posted March 2, 2020 15 hours ago, emmanuelf said: Hook up the ground to your Video and Audio RCA connectors. Yeah, this was it. I followed the youtube video of a dude in France doing the mod, and hooked up everything to where he did, and his worked. Later when mine didn’t I stepped back, looked, and though “hmm... not everthing has enough wires to it... sure enough, that was the problem. However, I dripped a crap ton of solder on some parts I shouldn’t have an now the controllers don’t work right. Quote Link to comment Share on other sites More sharing options...
ApolloBoy Posted March 7, 2020 Share Posted March 7, 2020 On 3/1/2020 at 9:35 PM, GenetixJ said: However, I dripped a crap ton of solder on some parts I shouldn’t have an now the controllers don’t work right. ... Did you try removing it with desoldering braid at all? Quote Link to comment Share on other sites More sharing options...
GenetixJ Posted March 9, 2020 Author Share Posted March 9, 2020 That is my next step. I need to learn how to use the desoldering braid, and probably get a better iron. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.