nnannos Posted June 8, 2020 Share Posted June 8, 2020 Last week I made an AV mod on Atari 2600A compatible 4 switch with 128 games but I have faint jailbars which propably were there in RF but was not noticeable, but i am not sure for that. I give some pictures below with the signal caught before RF with many RF parts removed. Can anyone confirm if I got the signal from correct place OR the problem is on some part of the atari(e.g. Tia or Riot chip) Red cable is video on R19 and white is audio on R20) Thank you in advance Oscilator_video.mp4 Quote Link to comment Share on other sites More sharing options...
nnannos Posted June 9, 2020 Author Share Posted June 9, 2020 Today tried to connect Atari 2600 to RCA TO VGA connector but it did not have color. I suspect all the signal noise depends basically on the specific TV set! Quote Link to comment Share on other sites More sharing options...
Wizzard Posted February 23, 2021 Share Posted February 23, 2021 Have you fixed that? I read on FB that we need to use shielded cable. I have very similar problem on my Jr. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.