Omega-TI Posted October 7, 2020 Share Posted October 7, 2020 Oh yeah! I'm feeling it, in fact I had to wipe a little drool off the corner of my mouth. I feel like Homer Simpson when he sees doughnuts. Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted October 7, 2020 Share Posted October 7, 2020 9 hours ago, wierd_w said: WHEE! See how that door works? It does not stay open though, and wants to fall shut, but the fact that it actually opens and shuts is damned exciting for me. The letters need to be gouged out with the sewing pin, (though I a thinking I should upgrade to a leather worker's awl because it is more rigid and easier to control) You might also look at the needle files in a store that sells beading supplies. I have a round one that comes to a beautiful needle-sharp tip for reaming out tiny holes. Quote Link to comment Share on other sites More sharing options...
wierd_w Posted October 7, 2020 Share Posted October 7, 2020 The awl has a nice fat handle though... Anyhoo, I have it all slathered up in black epoxy right now.. Getting the bottom ready for printing. Thankfully it does not take 3 damn days to print like the top. 1 Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted October 7, 2020 Share Posted October 7, 2020 9 hours ago, wierd_w said: See how that door works? It does not stay open though, and wants to fall shut Most of my real Synthesizers' doors will not stay open. The hinges are very loose. Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted October 7, 2020 Share Posted October 7, 2020 13 minutes ago, OLD CS1 said: Most of my real Synthesizers' doors will not stay open. The hinges are very loose. That does NOT matter to me. Gawd, it's a thing of beauty... and it's still in raw form! ? Quote Link to comment Share on other sites More sharing options...
GDMike Posted October 7, 2020 Share Posted October 7, 2020 You did forget to put your initials on that face..hmmm error Quote Link to comment Share on other sites More sharing options...
wierd_w Posted October 8, 2020 Share Posted October 8, 2020 Why would I sign it? I do open hardware type stuffs yo. When this thing is proven to properly fit a 32k+tipi, then I will release the data into the wild. Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted October 8, 2020 Share Posted October 8, 2020 18 minutes ago, wierd_w said: Why would I sign it? I do open hardware type stuffs yo. When this thing is proven to properly fit a 32k+tipi, then I will release the data into the wild. I thought he was talking about an omega symbol. 1 Quote Link to comment Share on other sites More sharing options...
wierd_w Posted October 8, 2020 Share Posted October 8, 2020 He gets that on the speech synth enclosure. 1 1 Quote Link to comment Share on other sites More sharing options...
GDMike Posted October 8, 2020 Share Posted October 8, 2020 11 hours ago, OLD CS1 said: I thought he was talking about an omega symbol. Sure it needs it. 11 hours ago, wierd_w said: He gets that on the speech synth enclosure. Ahhh 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted October 10, 2020 Share Posted October 10, 2020 ... I think when all is said and done, because of all of work @wierd_w has been doing to perfect the 3D printer designs, I may actually be able give @virios some competition. Still, years on, it's hard to look at his beige system and not drool a little... ... the man rose the bar for everyone with that one. 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted October 10, 2020 Share Posted October 10, 2020 ... come to think of it, @twoodland may want to get one of those speech cases as well to spray paint orange. His system has one item that does not belong in that photo... 1 Quote Link to comment Share on other sites More sharing options...
wierd_w Posted October 10, 2020 Share Posted October 10, 2020 (edited) why spray it-- just print it in orange. Edited October 10, 2020 by wierd_w Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted October 10, 2020 Share Posted October 10, 2020 1 hour ago, wierd_w said: why spray it-- just print it in orange. I thought about that... it might not be a perfect match. Quote Link to comment Share on other sites More sharing options...
wierd_w Posted October 10, 2020 Share Posted October 10, 2020 (edited) He does not have perfect matches in the image you supplied already. Compare the rightmost enclosure there, with the orange of his data recorder. (Or even the shell of his FinalGrom, with is spraypainted beige TI) Personally, I would not use paint on the beige TI anyway. I would use vinyl dye. Edited October 10, 2020 by wierd_w 3 Quote Link to comment Share on other sites More sharing options...
wierd_w Posted October 11, 2020 Share Posted October 11, 2020 (edited) Steady progress. Rough sanding underway. Will eventually be smooth and sexy like the speech on the left, but has to finish getting rough sanded first. Edited October 11, 2020 by wierd_w 7 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted October 11, 2020 Share Posted October 11, 2020 Super awsomely cool! I can't wait to get home from work and see those on the big monitor. Quote Link to comment Share on other sites More sharing options...
wierd_w Posted October 11, 2020 Share Posted October 11, 2020 Oh? Want eye candy? A bit more work done on rough sanding before bed. 5 Quote Link to comment Share on other sites More sharing options...
CreeB Posted October 11, 2020 Share Posted October 11, 2020 Ah, TI-99 speech synthesis! My favorite use of it was in the board game "The Omega Virus." The computer sounds monotonous... while the virus sounds smug as hell! That virus guy from Toonami sounded WAY better than Omegsy. Quote Link to comment Share on other sites More sharing options...
wierd_w Posted October 11, 2020 Share Posted October 11, 2020 Yes yes, but this is a home-made enclosure, for beige TIs. The actual module only ever came in a black and silver enclosure. (and a dedicated enclosure for the TIPI+32K board never existed, because this version is meant to live inside a speech enclosure.) Omega recently splurged on Yet Another TI, this time in Beige, which from what I can gather, is an event nobody ever truly anticipated. This set of enclosures (that I am still working on) are for him. 1 Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted October 11, 2020 Share Posted October 11, 2020 1 hour ago, wierd_w said: [...]this is a home-made enclosure, for beige TIs. [...] Very nice job! Quote Link to comment Share on other sites More sharing options...
twoodland Posted October 12, 2020 Share Posted October 12, 2020 On 10/10/2020 at 7:59 AM, Omega-TI said: ... come to think of it, @twoodland may want to get one of those speech cases as well to spray paint orange. His system has one item that does not belong in that photo... @Omega-TI - Since that photo, I made the speech synth orange to match. I would love the addition of a TIPI integration into an additional (orange printed) case, however, I use the SAMS sidecar. If I could get a TI Speech Synth sticker, that would be awesome! 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted October 12, 2020 Share Posted October 12, 2020 A sticker? Sure, let me see what I can work up on my end on Tuesday for your approval. If you like it, I'll toss it in an envelope for ya. 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted October 12, 2020 Share Posted October 12, 2020 46 minutes ago, twoodland said: @Omega-TI - Since that photo, I made the speech synth orange to match. I would love the addition of a TIPI integration into an additional (orange printed) case, however, I use the SAMS sidecar. If I could get a TI Speech Synth sticker, that would be awesome! @twoodland, I figured what the hell, I had time this evening so I got out my camera, took a photo, removed the background, cropped and aligned the image and then printed it up on a clear label. It's nearly identical in size. Send me a PM and I'll get it out in the Monday mail. 1 Quote Link to comment Share on other sites More sharing options...
twoodland Posted October 12, 2020 Share Posted October 12, 2020 Just now, Omega-TI said: @twoodland, I figured what the hell, I had time this evening so I got out my camera, took a photo, removed the background, cropped and aligned the image and then printed it up on a clear label. It's nearly identical in size. Send me a PM and I'll get it out in the Monday mail. AWESOME! Will do! Thank you so much! 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.