Jump to content
tschak909

#FujiNet Testing and Bug Reporting Thread

Recommended Posts

On 8/5/2020 at 4:54 PM, Mr Robot said:

First output from my Fujinet P: device. Mind Blown!

Here are 2 pdf's printed using Daisy-Dot II

 

I'm posting in the bug thread for two things.

 

1. There is something going on at the top of the pages, it looks like a header/footer isn't being printed on the page correctly, I wonder if the page size is wrong?I don't know how to set it.

 

 

539793672_Screenshot2020-08-05at15_54_08.thumb.png.89626a273252d4c4ed52ce69c14ddd45.png

 

 

2. The DDIIDOC.1 file should be 11 pages and it's only 6, I'm going to try and print it again when the fujinet finishes plotting an Atariartist picture to svg (What a time to be alive!)

 

Here are a couple of screenshots to show off the awesomeness

677833755_Screenshot2020-08-05at15_33_11.thumb.png.8392e284ab174817e5fb2156a0cb7f87.png

2057783503_Screenshot2020-08-05at15_34_49.thumb.png.6939015b6e4ddc19632516c0426b14e0.png

DDIIDOC1.pdf 3.78 MB · 4 downloads readme.pdf 432.51 kB · 4 downloads

Thanks for stressing the emulator! The EPSON FX emulator sets the first line to print on the bottom of the previous page. I had to do this to make The Print Shop output OK. A work around is to execute a linefeed right before printing. I could make another instance of the emulator that starts at the top of the page as expected - that might be easiest for everyone.

 

P.S. I could not open the DDIIDOC1.pdf file.

Share this post


Link to post
Share on other sites
9 minutes ago, jeffpiep said:

P.S. I could not open the DDIIDOC1.pdf file.

It downloads and opens fine in Firefox and Preview (mac) here

 

How are you setting the page length? It looks like when it hits a form feed it's not quite hitting the top of the next sheet. This used to happen on real printers when the lines per page wasn't set correctly and you were using fan fold paper

Share this post


Link to post
Share on other sites
2 minutes ago, Mr Robot said:

It downloads and opens fine in Firefox and Preview (mac) here

 

Chrome on Windows gives an error; Foxit Reader (also Windows) gives an error that indicates the file is incomplete or corrupted, but does open it.

Share this post


Link to post
Share on other sites
1 minute ago, DrVenkman said:

Chrome on Windows gives an error; Foxit Reader (also Windows) gives an error that indicates the file is incomplete or corrupted, but does open it.

Got it - Firefox opens it. It's curious how all the different readers handle errors. I need to track down what Acrobat doesn't like in that file. Thanks!

Share this post


Link to post
Share on other sites

I'm still trying to find a good picture print program, I'm struggling to remember which one I used as a kid but I want to throw a few pics at the epson and okimate emulators.

 

Share this post


Link to post
Share on other sites
Just now, Mr Robot said:

I'm still trying to find a good picture print program, I'm struggling to remember which one I used as a kid but I want to throw a few pics at the epson and okimate emulators.

 

We also have GRANTIC mode, which can be used with the GRANTIC.ATR posted in the main #FujiNet thread, that can capture screen dumps.

 

Share this post


Link to post
Share on other sites
9 minutes ago, Mr Robot said:

I'm still trying to find a good picture print program, I'm struggling to remember which one I used as a kid but I want to throw a few pics at the epson and okimate emulators.

 

This would stress the EPSON FX emulator some more: 

That post prompted me to ask C.B. if we could screen dump the color pixel data instead of ESC/P dot graphics - he wrote the GRANTIC screen dump.

The Okimate is getting there ... i'll have something soon for printing with its COLOR print utility.

  • Like 4

Share this post


Link to post
Share on other sites
19 hours ago, Mr Robot said:

I'm still trying to find a good picture print program, I'm struggling to remember which one I used as a kid but I want to throw a few pics at the epson and okimate emulators.

 

I think RamBrandt had a print module that let you print in b&w or color.

Share this post


Link to post
Share on other sites

Couple of bugs in the latest firmware/tnfsd

 

You can select an empty host line, it takes you to a blank screen with this at the bottom

IMG_3741.thumb.jpeg.e4828d30ca8cf7dbf4eb675b2192baf7.jpeg

I don't know what a DIRECTORYter is ;)

 

TK-II keyboard PG-Up and PG-Down act like arrow Up/Down not < and >

 

Filter returns the first file in the list

IMG_3746.thumb.jpeg.6a67e34de35e24d3814f694478d498c8.jpeg

 

Searching for "antic*" returns everything with antic in it somewhere

IMG_3742.thumb.jpeg.76d3b4bd0d15a8ce833248142a89526a.jpeg

 

But searching for "rob*" does not return all the copies of Mr Robot in the root

IMG_3744.thumb.jpeg.b3a6d2b647e6b0dd866790b7ef787915.jpeg

 

Searching for "*rob*" works though

 

I got this error

 

IMG_3743.thumb.jpeg.460f777fddc238a2a5f8f627cad5ba6c.jpeg

Trying to insert a long filename file inside a long foldername into d1

 

Pressing OPTION does not boot the Fujinet unless you are back at the host screen which is something you now have to hit esc to get back to because of the staying in the current folder thing (which works great!) that you just implemented.

 

 

Share this post


Link to post
Share on other sites

From what I see here, the build doesn't have the latest config, I've done a ton of changes in the last two days... sorry, things are moving REALLY fast. :)

 

-Thom

Share this post


Link to post
Share on other sites

I updated from Funjinet Flasher immediately before doing the tests.

 

Share this post


Link to post
Share on other sites

I downloaded and flashed my FujiNet with the latest code today. Very nice improvements in CONFIG - thanks Thom! 
 

But I did discover a bug in the long file name listing when a filter is being used. See below:

 

8E1BF5CD-73B6-4B6D-972B-98791907BE7C.jpeg

Share this post


Link to post
Share on other sites

Ok, try that one more time? I did explicitly adjust directory positions when filters are being used, but it looks like in some cases read dir will return the wrong entry, and I am trying to track down why this is happening...

 

-Thom

Share this post


Link to post
Share on other sites
4 minutes ago, tschak909 said:

Ok, try that one more time?

Different file, different directory, different filter - same kind of erroneous result in the long name at bottom. 
 

A843D8C7-3267-4269-9D3A-F6093291F84D.thumb.jpeg.724c9c21b27ad4b4e7db310e702fee03.jpeg

Share this post


Link to post
Share on other sites

@DrVenkman That one was weird, but I found it. 

 

The function to display the long filenames was not being passed the correct variable (in this case, the directory path + the assigned filter), so it was repositioning the directory cursor as if no filter was being specified. This only affected the long filename display. I have fixed it, and the test you did above just worked consistently, for me.

 

This was not found sooner because of how I habitually use the file selector, my bad. :)

 

I have asked @mozzwald to crank another build with this fix.

 

 

 

-Thom

 

WIN_20200824_17_43_28_Pro.jpg

Edited by tschak909
  • Like 6
  • Thanks 1

Share this post


Link to post
Share on other sites
2 hours ago, mozzwald said:

Build is ready for you ;) 

Bazinga! :) 

 

Thanks, fellas. 

D9221F08-3BA7-41C0-827E-667EC440362E.jpeg

7A3212EA-7991-45B8-81AE-EF662930FA7D.jpeg

  • Like 3

Share this post


Link to post
Share on other sites

Hello, All.  I have a free weekend and am looking to finally get in to using my Fujinet device.  I wanted to first bring it up to the latest firmware.  I downloaded the Fujinet Flasher and USB to UArt driver, installed both.  When I plug the micro-usb cable in, nothing on the computer side happens, it doesn't recognize anything has been attached. No, de-dunk sound,  Nothing pops up under device manager either.

 

 

I installed the driver it said it was successful.

I ran the flasher as Admin.

I tried 3 different usb cables.

I tried 1 windows 10 laptop, tried multiple usb ports

I tried 1 windows 7 laptop, tried multiple usb ports

 

Both are running 64bit os.

 

On the Fujinet side the 3 LED light up for a couple of seconds then go off.

 

Am I  missing a step?

 

Thank You.

 

 

 

 

 

Edited by venom4728a

Share this post


Link to post
Share on other sites
7 minutes ago, venom4728a said:

Hello, All.  I have a free weekend and am looking to finally get in to using my Fujinet device.  I wanted to first bring it up to the latest firmware.  I downloaded the Fujinet Flasher (as Admin) and USB to UArt driver, installed both.  When I plug the micro-usb cable in, nothing on the computer side happens, it doesn't recognize anything has been attached. No, de-dunk sound,  Nothing pops up under device manager either.

 

I tried 3 different usb cables.

I tried 1 windows 10 laptop, tried multiple usb ports

I tried 1 windows 7 laptop, tried multiple usb ports

 

Both are running 64bit os.

 

On the Fujinet side the 3 LED light up for a couple of seconds then go off.

On Windows I believe it should appear under com ports in device manager if the driver is installed correctly, otherwise as something with an exclamation point. The 3 light flash and then off is normal for the leds. Seems like the FujiNet is booting at least but the USB interface chip is separate.

 

Hard to say exactly what the problem is. Sounds like you've tried the common stuff. Usually it's cable or driver problem. I flash each one via USB before shipping. That doesn't mean something didn't happen enroute.

Share this post


Link to post
Share on other sites
5 minutes ago, mozzwald said:

On Windows I believe it should appear under com ports in device manager if the driver is installed correctly, otherwise as something with an exclamation point. The 3 light flash and then off is normal for the leds. Seems like the FujiNet is booting at least but the USB interface chip is separate.

 

Hard to say exactly what the problem is. Sounds like you've tried the common stuff. Usually it's cable or driver problem. I flash each one via USB before shipping. That doesn't mean something didn't happen enroute.

I just tried a 4th usb cable and it came up worked. Weird the first 3 usb cables did not work.

 

Thank you for the response.  

 

it says it flashed to the latest version. I seen a bunch of stuff flying by the screen, so sure something happened, :)

 

 

  • Like 1

Share this post


Link to post
Share on other sites

Side note: You may not need the UART driver.  I set up a new Windows 10 machine two weeks ago and have been using it to update firmware, debug, etc., without issue using the Windows built-in driver.

 

 

com-3.png

Share this post


Link to post
Share on other sites

Request: WinXP32 Flasher. Link Please.

Thank You.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...