+karri Posted August 30, 2020 Share Posted August 30, 2020 I just picked up the BennVenn's card "El Cheapo". First impressions: - eeprom saves work like magic I have no idea how it is done but all my homebrew games use the eeprom and this cart appears to store progress. So when you play a game your hi-score will stay just as on a real cart. - it is fast There is literally no waiting time once you select the game. It is just as the real carts. - beware of the SD cart slot. I first inserted my cart in the slot and wondered why it did not work. The printed cover had moved during shipment. The packaging box looked like someone had driven over it with a truck. With a magnifier glass and tweezers I managed to get my SD cart back. So be careful when you insert the cart. I will still try out my bigger games like On Duty and Sampo's great minigames to see if the eeprom works on all of these. 3 Quote Link to comment Share on other sites More sharing options...
Igor Posted September 1, 2020 Share Posted September 1, 2020 @karri the EEPROM is a real EEPROM, not emulated so when a game writes data to it, it's writing to the real chip. The ElCheapoSD firmware saves the contents of the EEPROM when it boots up using the last played ROM's file name with a .SAV extension I believe. I have a much later version of the firmware now that I plan to release with an updated menu, hopefully in the next week or two. 1 Quote Link to comment Share on other sites More sharing options...
Turbo Laser Lynx Posted September 1, 2020 Share Posted September 1, 2020 @karri Did it take long to arrive from the u.s.? Quote Link to comment Share on other sites More sharing options...
+karri Posted September 1, 2020 Author Share Posted September 1, 2020 20 minutes ago, Turbo Laser Lynx said: @karri Did it take long to arrive from the u.s.? Australia. Yes. 1 Quote Link to comment Share on other sites More sharing options...
Turbo Laser Lynx Posted September 1, 2020 Share Posted September 1, 2020 Haha, thanks! Quote Link to comment Share on other sites More sharing options...
battleman13 Posted September 2, 2020 Share Posted September 2, 2020 I love mine! I bought 3 of em, and 3 Lynx 2 screens back in like.... March? Got em a few weeks ago. Haven't gotten fully around to fitting the screens yet, but did test the flash carts! I noted the exact same thing you did. Except mine were all slotted just fine, I had to remove them to load roms. Upon inserting, it's easy to get the sd cart wedged in between the slot on the board, and the casing. I nearly had to take one flash cart fully apart (had to pry on it quite a bit, loosen the adhesive) to get the SD card back. I also noted some variance in the casings. Most might not, but since I had multiples, I tested all 3. One fit much snugger than the others. One I had to insert and remove a bunch of times to get it to read. All 3 tested in the same lynx 2. It's also stated they might not fit the best in a lynx 1? I haven't tried. I can't wait for the new firmware to drop from atari gamer. It's overall a wonderful flash cart, at a great price. I can live with the case being "a tad disappointing", but I know they had a rough go at getting them done as well. I can be forgiving there. I'd possibly like to upgrade in the future. I got a black shell, but I saw BennVenn made some funky little multi color shells, I think the design is tweaked? I'll have to confirm that though. I'm happy though, easy way to try out all the new homebrew games from the latest round of the competition. Having a lot of fun with those! 2 Quote Link to comment Share on other sites More sharing options...
spspspsp Posted September 3, 2020 Share Posted September 3, 2020 I've had one for two or three weeks now, and I really like it. I also own one of SainT's first Lynx carts. The shell on my cart didn't fit at all, so I had to remove it. I was bummed about that. I would have much preferred waiting a little longer and having a shell that fits in my console instead of receiving it as early as I did. I like BennVenn's stuff, but this is not the first time I've had hiccups with a 1st gen product of his. That said, it is speedy, and where I live costs just about half the price of the new LynxGD (which I had also been considering purchasing), including shipping. I don't mind the simplistic menu, but I am eager to see what AtariGamer comes up with. It would be nice to be able page through the file listing, and would adding support for .o files and .lyx files be possible through that kind of FW update? It's a hassle to try and convert the files myself, and I can't get it to work correctly for all the files I have (the problem almost certainly lies between the keyboard and the chair). Quote Link to comment Share on other sites More sharing options...
+karri Posted September 3, 2020 Author Share Posted September 3, 2020 The greatest value for me is that the cart really does do the eeprom saves for all kind of hobby releases. This is nice for titles like On Duty where the gaming time is a bit longer. 1 Quote Link to comment Share on other sites More sharing options...
oakcitycomics Posted September 3, 2020 Share Posted September 3, 2020 On 8/30/2020 at 4:24 AM, karri said: I just picked up the BennVenn's card "El Cheapo". First impressions: - eeprom saves work like magic I have no idea how it is done but all my homebrew games use the eeprom and this cart appears to store progress. So when you play a game your hi-score will stay just as on a real cart. - it is fast There is literally no waiting time once you select the game. It is just as the real carts. - beware of the SD cart slot. I first inserted my cart in the slot and wondered why it did not work. The printed cover had moved during shipment. The packaging box looked like someone had driven over it with a truck. With a magnifier glass and tweezers I managed to get my SD cart back. So be careful when you insert the cart. I will still try out my bigger games like On Duty and Sampo's great minigames to see if the eeprom works on all of these. Same issue I had. I was like why is my SD not working then I looked and the way the case is molded you have to insert the sd card at an angle to go in the slot vs right over it. Outside of that its been great. I have a 1st release RetroHQ Lynx SD and between the two either works great. The RetroHQ does have a nicer menu at the moment but when it comes to actually playing games either one is fantastic Quote Link to comment Share on other sites More sharing options...
Igor Posted September 6, 2020 Share Posted September 6, 2020 For some reason @BennVenn can't login to the forums so he's asked me to pass this message on... Quote Free injection molded shells will be available for those with the resin shells. We're waiting on economy international shipping to resume else you could combine with another order on tracked postage The issues that people have described in this thread appear to be with the early versions of the resin shells, so get in touch with BennVenn (via his store) to arrange your free replacement shell. Quote Link to comment Share on other sites More sharing options...
BennVenn Posted September 7, 2020 Share Posted September 7, 2020 I can log in again! Thanks Igor, In regards to the black or green resin shells, as many of you may know these were a quick fix to get these out as fast as possible while we battled with our Injection molding machines and molds. It appears the resin warped on some shells in the week(s) long journey to you and has caused a problem or two. Good news is we've got the new molds perfected and compatible with Lynx 1&2. We'll pop them up in the store, free of charge. We just need a way to get them to you. When Auspost resumes international letter mail, we can ship them out at our expense. Or if you have an existing order open in our store, shoot us an email and we'll add one in before we ship. Thanks for supporting our Flash cart and apologies if you were disappointed in the resin print shell quality. We're keen on making this right. Oh and regards to non LNX files, the firmware update I'm working on 'kind of' supports these. All genuine rom dumps of the correct size will be guessed as to their block sizes which so far seems reliable. Homebrew of a non standard ROM size (Say, 18kbytes) its *assumed* to be a 512kbyte ROM. This seems to satisfy most roms made with CC65. Without a header there's no way to be certain of the block size so if you can, add a header to your roms. Good to hear EEPROM support is working as planned! 1 Quote Link to comment Share on other sites More sharing options...
BovineD Posted October 7, 2020 Share Posted October 7, 2020 I received my card as well and everything works great and fitment is perfect for both the SD card and in the Lynx units. There are some games that fail to load however so I just wanted to make sure if all games were supported or if some games are locked out due to rights issues? Just wanted to confirm as I would understand both ways but the main issue is that I have an original copy of Daemonsgate card and several other ROM board carts that wont fit in my Lynx I and I was hoping to play it through the Elcheapo. Quote Link to comment Share on other sites More sharing options...
Igor Posted October 8, 2020 Share Posted October 8, 2020 Nothing is locked out due to rights but the cart will only load LNX files. If you're trying to load LYX or O files, you will need to convert them first. Quote Link to comment Share on other sites More sharing options...
BovineD Posted October 8, 2020 Share Posted October 8, 2020 10 hours ago, Igor said: Nothing is locked out due to rights but the cart will only load LNX files. If you're trying to load LYX or O files, you will need to convert them first. Thanks....I checked the rom files and they are def LNX. When I try to load them I either get stuck at loading from the defautl BennVenn menu or it loads then shows INSERT GAME for a few sec and goes back to the loader. Bad roms maybe? Quote Link to comment Share on other sites More sharing options...
BovineD Posted October 8, 2020 Share Posted October 8, 2020 the roms wont load in Handy either so I think its just bad roms...thx 1 Quote Link to comment Share on other sites More sharing options...
sage Posted October 8, 2020 Share Posted October 8, 2020 4 minutes ago, BovineD said: the roms wont load in Handy either so I think its just bad roms...thx some rom sites gave lyx a lnx postfix, just to annoy people. 1 Quote Link to comment Share on other sites More sharing options...
Igor Posted October 8, 2020 Share Posted October 8, 2020 @BovineD I'm working on the new menu for the cart so if you want, DM me the roms. you're having issues with and I'll have a look at what's wrong, it could be as @sage said though. Quote Link to comment Share on other sites More sharing options...
gilsaluki Posted October 21, 2020 Share Posted October 21, 2020 Got my cart today. Works well. Be careful the micro-SD slot is spring loaded. When I unclicked it, it shot across the room. Found it. 1 1 Quote Link to comment Share on other sites More sharing options...
OldAtAtari Posted January 23, 2021 Share Posted January 23, 2021 A few months after the last post in this topic... I just got my El Cheapo (Rev 2) a couple days ago. It's really great. My sd card slot seems really stable, not sliding around as was apparently happening for some of you folks with the earlier cartridge type. And the ability to play all these homebrews in addition to the ROMs of the official games I own, is really terrific. I've found one game that I care about that is not working. Zarlor Mercenary. I've downloaded several versions of the ROM (by the way, I always like to mention that I do own the actual game). Anyhow, all the versions work on Handy, but they break in the El Cheapo. They will load and get past the title screen, and then they will freeze up. I've posted about this on BennVenn's Discord site, and BennVenn was very nice and accommodating, and is still working with me to get this resolved. But with time zones and all, I'd like to be working on it myself while they're asleep. They said it might need a header, so I used the Atari Gamer site to convert the LNX to an LYX. Then I used make_lnx.exe to convert it back to a LNX with a header. It still fails in the same way, just past the title screen. I wonder what I'm doing wrong... If anyone has any ideas, or if anyone can see if Zarlor Mercenary works in their El Cheapo, I would be very appreciative. Thanks! Quote Link to comment Share on other sites More sharing options...
thefred Posted January 23, 2021 Share Posted January 23, 2021 6 hours ago, OldAtAtari said: A few months after the last post in this topic... I just got my El Cheapo (Rev 2) a couple days ago. It's really great. My sd card slot seems really stable, not sliding around as was apparently happening for some of you folks with the earlier cartridge type. And the ability to play all these homebrews in addition to the ROMs of the official games I own, is really terrific. I've found one game that I care about that is not working. Zarlor Mercenary. I've downloaded several versions of the ROM (by the way, I always like to mention that I do own the actual game). Anyhow, all the versions work on Handy, but they break in the El Cheapo. They will load and get past the title screen, and then they will freeze up. I've posted about this on BennVenn's Discord site, and BennVenn was very nice and accommodating, and is still working with me to get this resolved. But with time zones and all, I'd like to be working on it myself while they're asleep. They said it might need a header, so I used the Atari Gamer site to convert the LNX to an LYX. Then I used make_lnx.exe to convert it back to a LNX with a header. It still fails in the same way, just past the title screen. I wonder what I'm doing wrong... If anyone has any ideas, or if anyone can see if Zarlor Mercenary works in their El Cheapo, I would be very appreciative. Thanks! It did work on mine, I was just playing the game for a bit. The game is 128k if that helps. 1 Quote Link to comment Share on other sites More sharing options...
OldAtAtari Posted January 23, 2021 Share Posted January 23, 2021 2 hours ago, thefred said: It did work on mine, I was just playing the game for a bit. The game is 128k if that helps. Thank you, the afred! Yes that does help. It tells me that there's a working ROM out there somewhere. Persistence will save the day! Do you remember if you had to do anything to the file to make it work? Did you have to add a header or anything like that? Thanks again. Quote Link to comment Share on other sites More sharing options...
Igor Posted January 24, 2021 Share Posted January 24, 2021 Same for me, the 128k ROM works fine. Here's the MD5 checksum for it (headless LYX file, not the LNX file)... d008f41ec119e2c5c6a0782aebf148a8 Quote Link to comment Share on other sites More sharing options...
OldAtAtari Posted January 25, 2021 Share Posted January 25, 2021 22 hours ago, Igor said: Same for me, the 128k ROM works fine. Here's the MD5 checksum for it (headless LYX file, not the LNX file)... d008f41ec119e2c5c6a0782aebf148a8 Thank you, Igor! Someone sent me his working ROM, and it did not work for me. And today I received my actual Zarlor cartridge (I had previously ordered it but hadn't received it yet), and it did not work on my Lynx! I think my Lynx just cannot handle that game, in any format. I'll post a new topic about that, since my problem doesn't seem related to my El Cheapo. Quote Link to comment Share on other sites More sharing options...
Igor Posted January 25, 2021 Share Posted January 25, 2021 Oh how odd! The game is rather small - the ROM anyway, I noticed that it doesn't get detected properly by the Cartridge Reader/Writer and I have to use manual settings to rip it. Could be something special with this game's cart. Quote Link to comment Share on other sites More sharing options...
OldAtAtari Posted January 25, 2021 Share Posted January 25, 2021 5 minutes ago, Igor said: Oh how odd! The game is rather small - the ROM anyway, I noticed that it doesn't get detected properly by the Cartridge Reader/Writer and I have to use manual settings to rip it. Could be something special with this game's cart. Oh, like the game/cart was somehow programmed differently at the factory? In which case, maybe some motherboard versions recognize it while others don't. I started a separate topic about this. Maybe someone will chime in with a similar problem. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.