Grand_National Posted December 15, 2020 Share Posted December 15, 2020 How common were these? (these are current photos) RS must have struck a deal probably with the manufacturer since the 1200XLs had trouble selling due to the price. I always thought this was strange because they contained no spec sheet at all (not even voltage or pinouts, let alone a key mapping). The hobbyist back in the day would have needed to decipher this on their own in order to use. 1 Quote Link to comment Share on other sites More sharing options...
+DrVenkman Posted December 15, 2020 Share Posted December 15, 2020 If you do a search of the forum, you’ll find other discussion over the years. My supposition is that after the 1200XL’s very short production run, Mitsumi was stuck with a bunch of keyboards it had tooled up to build but were never delivered. They probably languished in a warehouse for 10 years until they were surpluses, when some smart (?) buyer for Radio Shack snapped them up to offer to hobbyists and tinkerers. At least some have reported that they are keyboard mechs only, without an internal membrane. I don’t know if that’s true or not. Quote Link to comment Share on other sites More sharing options...
mutterminder Posted December 15, 2020 Share Posted December 15, 2020 I've got one that I picked up many years ago. Last time I checked my 1200XL keyboard still works so I haven't used it. However, given the time elapsed, it's possible that I would find that neither keyboard works right now. Quote Link to comment Share on other sites More sharing options...
+kheller2 Posted December 15, 2020 Share Posted December 15, 2020 RS also did this for other computer keyboards. You can find TI99/4A, various Commodore keyboards, etc. Quote Link to comment Share on other sites More sharing options...
BillC Posted December 15, 2020 Share Posted December 15, 2020 7 hours ago, DrVenkman said: If you do a search of the forum, you’ll find other discussion over the years. My supposition is that after the 1200XL’s very short production run, Mitsumi was stuck with a bunch of keyboards it had tooled up to build but were never delivered. They probably languished in a warehouse for 10 years until they were surpluses, when some smart (?) buyer for Radio Shack snapped them up to offer to hobbyists and tinkerers. At least some have reported that they are keyboard mechs only, without an internal membrane. I don’t know if that’s true or not. Radio Shack wasn't the only one to sell these, I found them in a Princess Auto and Farm Machinery store in Grande Prairie Alberta in the early 90's in the surplus section priced for only CDN$1.50. I thought they were for the 1200XL but wasn't certain since I had never seen other than in pictures at the time, they were complete keyboards ready to plug into a 1200XL. As I now have 3 1200XLs I'm happy that I took a chance a purchased a few. 2 Quote Link to comment Share on other sites More sharing options...
Tillek Posted December 15, 2020 Share Posted December 15, 2020 8 hours ago, kheller2 said: RS also did this for other computer keyboards. You can find TI99/4A, various Commodore keyboards, etc. I actually bought one of the TI99 ones. Not for a TI99, but just for kicks (they always wrote "The Wizard" on my receipt because I came in there so often). I think that one had a pinout diagram though. Probably still have the keyboard in my box of electronic junk. ... if only I could find the box. Quote Link to comment Share on other sites More sharing options...
tjlazer Posted December 16, 2020 Share Posted December 16, 2020 They also sold Commodore 16 keyboards Quote Link to comment Share on other sites More sharing options...
ClausB Posted December 17, 2020 Share Posted December 17, 2020 My friend Lance got ahold of some somewhere and we tried to sell them at a CHAOS meeting. That's how I got my one. Quote Link to comment Share on other sites More sharing options...
towmater Posted December 17, 2020 Share Posted December 17, 2020 I recently installed one. Even though it was essentially NOS, the keyboard Mylar "card edge" (for lack of a better phrase) still needed a compression clamp added to work. Quote Link to comment Share on other sites More sharing options...
hueyjones70 Posted January 5, 2021 Share Posted January 5, 2021 I bought one several months ago on ebay and it didn't work until I peeled off the mylar and cleaned everything with alcohol. Then it worked perfectly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.