rcajun90 Posted December 17, 2020 Share Posted December 17, 2020 Opening up an O2, the ribbon came out. I’ve tried and tried to reinsert it but it won’t go back in. Any suggestions? Quote Link to comment Share on other sites More sharing options...
Keatah Posted December 18, 2020 Share Posted December 18, 2020 Sometimes I'll stuff a cable back in by doing it at a sharp angle and then sliding over to the edge and rocking back'n'forth. Other times it's best to insert it straight down holding it at both ends for tension. It's a practiced technique hard to describe. A few times I used a stiff support like a credit card, or even two, sandwich-style, to keep it from bending. I'm sure others will offer yet different suggestions or maybe make/show a video on the technique. Quote Link to comment Share on other sites More sharing options...
rcajun90 Posted January 11, 2021 Author Share Posted January 11, 2021 On 12/17/2020 at 3:35 PM, Keatah said: Sometimes I'll stuff a cable back in by doing it at a sharp angle and then sliding over to the edge and rocking back'n'forth. Other times it's best to insert it straight down holding it at both ends for tension. It's a practiced technique hard to describe. A few times I used a stiff support like a credit card, or even two, sandwich-style, to keep it from bending. I'm sure others will offer yet different suggestions or maybe make/show a video on the technique. Thanks for the reply and advice. The ribbon appears to be protected by a front and back sleeve that has seperated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.