teknohed Posted July 21, 2023 Share Posted July 21, 2023 Hopefully it is visible here, probably see it best in the black borders. sort of a vertical line of noise. I have seen similar from people who did composite mods of the 7800 without removing the audio from the composite going to the RF. Don’t think that is what is happening here as i am pulling audio separately. Let me know if you need some better footage. IMG_7015.mov Link to comment Share on other sites More sharing options...
teknohed Posted July 26, 2023 Share Posted July 26, 2023 Didn't get a response to this so I decided to just crack it open and have a go at all the solder joints just in case something was bridged. I shortened the wire lengths in several cases to clean it all up a bit. resoldered all the connections to the resistor bridge and re-soldered all the connections to the RCA jacks. And now it looks great! thanks to all for responding. Link to comment Share on other sites More sharing options...
Recommended Posts