8bitAndy Posted February 20, 2021 Share Posted February 20, 2021 (edited) My Vectrex is missing the reset button. It has a white plastic post where I assumed a nice button attached. I ordered a new button, but it does not fit on the post, it looks like the post is supposed to have a hollow center. Pressing the post resets the Vectrex, so the actual switch seems fine. Do I have a stock part, how is it supposed to look? Edited February 20, 2021 by 8bitAndy Quote Link to comment Share on other sites More sharing options...
gtoal Posted February 20, 2021 Share Posted February 20, 2021 Tony Lindberg in Sweden and I think Sean Kelly in the USA, maybe some others, offer machined aluminium replacements. There are also designs on places like thingiverse for 3D printing your own (though I did try one of those myself once and it was not a good fit). Quote Link to comment Share on other sites More sharing options...
8bitAndy Posted February 20, 2021 Author Share Posted February 20, 2021 (edited) 19 minutes ago, gtoal said: Tony Lindberg in Sweden and I think Sean Kelly in the USA, maybe some others, offer machined aluminium replacements. There are also designs on places like thingiverse for 3D printing your own (though I did try one of those myself once and it was not a good fit). I did order a replacement, it just doesn't fit. The replacement button has a post in the middle that doesn't fit the white plastic post on my Vectrex. I edited the original post to show my replacement button. Edited February 20, 2021 by 8bitAndy Quote Link to comment Share on other sites More sharing options...
128Kgames Posted February 20, 2021 Share Posted February 20, 2021 34 minutes ago, 8bitAndy said: I did order a replacement, it just doesn't fit. The replacement button has a post in the middle that doesn't fit the white plastic post on my Vectrex. I edited the original post to show my replacement button. I'd send that pic to the place you ordered the replacement button from for some advice, it looks like something broke off inside there maybe? I'm not sure what that area is supposed to look like. Also if you're on Facebook there's a great Vectrex group with lots of people who could probably know what to do. Quote Link to comment Share on other sites More sharing options...
gtoal Posted February 21, 2021 Share Posted February 21, 2021 the 3d-printed one does appear to go around the post, not inside it: https://www.thingiverse.com/make:393551 - and looks like someone worked out the scale problem I had noticed too... Quote Link to comment Share on other sites More sharing options...
Vectrexer Posted February 22, 2021 Share Posted February 22, 2021 On 2/20/2021 at 1:51 PM, 8bitAndy said: My Vectrex is missing the reset button. It has a white plastic post where I assumed a nice button attached. I ordered a new button, but it does not fit on the post, it looks like the post is supposed to have a hollow center. Pressing the post resets the Vectrex, so the actual switch seems fine. Do I have a stock part, how is it supposed to look? The Reset button actuator stem is hollow and threaded. On your Vectrex the screw from the reset button appears to be broken off from the button and still inside the actuator. Here are links to my YouTube and Google album videos on Vectrex control know an button removal. As well as what the look like when removed. Vectrex Front Panel Controls removal for Reset Button and Power-Volume Knob - Vectrex / 光速船 / Kousokusen https://photos.app.goo.gl/i21uwDmMszxG7yge8 Here is a a link to the album with pictures and movie. Vectrex Front Panel Controls removal for Reset Button and Power-Volume Knob - Vectrex / 光速船 / Kousokusen https://photos.app.goo.gl/uCwxAf578Kk58PkM2 1 1 Quote Link to comment Share on other sites More sharing options...
8bitAndy Posted February 23, 2021 Author Share Posted February 23, 2021 (edited) 23 hours ago, Vectrexer said: The Reset button actuator stem is hollow and threaded. On your Vectrex the screw from the reset button appears to be broken off from the button and still inside the actuator. Here are links to my YouTube and Google album videos on Vectrex control know an button removal. As well as what the look like when removed. Vectrex Front Panel Controls removal for Reset Button and Power-Volume Knob - Vectrex / 光速船 / Kousokusen https://photos.app.goo.gl/i21uwDmMszxG7yge8 Here is a a link to the album with pictures and movie. Vectrex Front Panel Controls removal for Reset Button and Power-Volume Knob - Vectrex / 光速船 / Kousokusen https://photos.app.goo.gl/uCwxAf578Kk58PkM2 Thank you. ? I was able to remove the old glue plugging my the actuator stem and screw in my reset button. Edited February 23, 2021 by 8bitAndy 3 Quote Link to comment Share on other sites More sharing options...
Vectrexer Posted March 5, 2021 Share Posted March 5, 2021 On 2/22/2021 at 10:28 PM, 8bitAndy said: Thank you. ? I was able to remove the old glue plugging my the actuator stem and screw in my reset button. Cool. Did you also make a video of the removal process? Or take pics? How did you remove the old screw thread and material? Quote Link to comment Share on other sites More sharing options...
8bitAndy Posted March 7, 2021 Author Share Posted March 7, 2021 On 3/5/2021 at 1:30 PM, Vectrexer said: Cool. Did you also make a video of the removal process? Or take pics? How did you remove the old screw thread and material? It turned out to be some superficial glue plugging the hole, no screw. I guess a previous owner tried to glue a threadless knob back on The glue didn't join very well to the actuator which made the removal easy once I knew what I was dealing with. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.