FujiNet device mount error

[IndyJones1023]

I have tried loading disk images off 4 different net sources and none will boot. I keep getting a "mount device error." Any ideas what's wrong?

[tschak909]

Hi. can you please run the FujiNet flasher, and press the Debug Monitor button, and paste the information, when you try to boot an image?

https://fujinet.online/download/

 

-Thom

[IndyJones1023]

There is nothing to select in the Serial port dialog box and there is no Debug Monitor button.

 

[tschak909]

(1) make sure the FujiNet device is attached to your computer

(2) restart the flasher

(3) press Serial Debug Output

 

-Thom

 

[IndyJones1023]

I tried and it didn't work. Still nothing to select in the serial port menu.

 

I closed the flasher again, unplugged the FujiNet, plugged it back into a different USB port, right-clicked on the flasher, Ran as Administrator - still nothing to select.

 

That was all with the FujiNet off.

 

I then redid everything but turned the FujiNet on before running the flasher. Still nothing comes up.

[mozzwald]

55 minutes ago, IndyJones1023 said:

Still nothing to select in the serial port menu.

Did you install the CP210x drivers from here?

[IndyJones1023]

Okay, I glossed over that. Now it's working. I hit the Serial Debug Output and see this.

[tschak909]

Good. As you use the FujiNet, debugging information should appear in the window.

 

-Thom

 

[IndyJones1023]

I'm supposed to have it plugged into my computer while using it on the Atari? They're in different rooms. Can't do that.

[tschak909]

yes.

[tschak909]

The debugging information I am asking about is to try and see what you could be doing wrong. 

 

Failing that, Explain the steps you are using to mount an image?

 

-Thom

 

[IndyJones1023]

Should I try to just flash the firmware and hope that works? I just bought the FujiNet a couple months ago and have used it about 4 times. 

[tschak909]

you can, but I don't think that's your problem. 

-Thom

 

[IndyJones1023]

I dug out an old netbook, but the FujiFlasher is 64-bit, I guess, because it doesn't run on the old girl.

[IndyJones1023]

I am using a work laptop and get this:

 

[IndyJones1023]

Scrolling up a bit I see some errors.

 

[IndyJones1023]

Now it doesn't display the error message, it just reboots to the Atari Memo Pad screen.

[tschak909]

What is host #2 ? The server is stating there is an error opening the image.

 

-Thom

 

[IndyJones1023]

Not sure. By that do you mean which TNFS server? If so, I have tried 3 or 4 and they all fail.

[tschak909]

That is _VERY_ strange. 

Have you tried loading from the local SD card slot?

 

Also, have you checked the [C]onfig screen to see if everything is okay ?

 

-Thom

 

[IndyJones1023]

I was able to load Asteroids from the SD slot.

 

I don't know what to look for in the Config screen. But since I can surf TNFS servers, I am guessing it's on the net, so that shouldn't be the issue.

[tschak909]

Can you talk a bit about your network? What router are you using? Have you tried anything on fujinet.pl ?

 

-Thom

[IndyJones1023]

I just tried Boulder Dash I fromfujinet.pl and it rebooted to the Memo Pad screen.

[IndyJones1023]

[tschak909]

ok. If this computer is working with other peripherals, I would say something wrong with the FujiNet hardware. 

 

-Thom