+Sauron Posted May 29, 2002 Share Posted May 29, 2002 Does anyone know of a good 6502 asm tutorial available on the web? My Google searches have yet to reveal one so far.... Quote Link to comment Share on other sites More sharing options...
Nukey Shay Posted May 29, 2002 Share Posted May 29, 2002 Dunno, but my advise is to lay your hands on as many Compute! magazines as you can...which has a beginner's column in nearly every ish. Quote Link to comment Share on other sites More sharing options...
Sheddy Posted May 29, 2002 Share Posted May 29, 2002 I'd say the same about looking through old Antic mags (also available on the web). www.6502.org has some tutorial stuff if you follow the links, but nothing you could call outstanding. Quote Link to comment Share on other sites More sharing options...
DEBRO Posted May 29, 2002 Share Posted May 29, 2002 These come from the NES Development page. 6502 Microprocessor info Assembly in one step 6502 Bugs Undocumented Opcodes I think there was a thread here already that had some information too. This is what I used to start out with, then I got a hold of Machine Language for Beginners from COMPUTE! and 6502 Assembly Language Programming by Lance Leventhal. 1 Quote Link to comment Share on other sites More sharing options...
+Allan Posted May 29, 2002 Share Posted May 29, 2002 Analog magazine ran a great tutorial on Assembly language called Boot Camp. Started by Tom Hudson and continued by I believe Carl Weiger (sp?) which ran for quite a while. They also ran it again from the beginning in the last couple of years of Analog's run. Unfortunately the Digital Analog project has been going slow and only a couple of douzon (sp?) articles are on line. If you have any old Analogs and want to contribute to htmling them, I urge you to contact them. http://www.cyberroach.com/analog/ In addition to Boot Camp I also recommend Atari Roots by Mark Andrews and Assembly Language Programming for the Atari Computers by Mark Chasin (The best Atari 8-bit/5200 assembly language book written in my opinion.) Allan Quote Link to comment Share on other sites More sharing options...
Jetboot Jack Posted May 29, 2002 Share Posted May 29, 2002 If ya want to program 6502 for 8bit/5200 then get a copy of Atari Roots! Atari Graphics and Arcae Game Design is quite useful as an overall tutorial - it delves into non DLI raster effects (so you can re-color sprites etc a la 2600 without DLI limitations) and also Software Sprite basics too... If its gneral 6502 I would recommend the Computes Machine language for beginners series as a good set of books. sTeVE Quote Link to comment Share on other sites More sharing options...
+Sauron Posted May 30, 2002 Author Share Posted May 30, 2002 Thanks for the info guys! I'm actually hoping to start developing for the Lynx, and maybe move to the older consoles afterwards. I have actually done 6502 and 68k before, but it's been YEARS since I've done any kind of programming. Quote Link to comment Share on other sites More sharing options...
zraider Posted June 12, 2002 Share Posted June 12, 2002 I'm pretty new to 6502 assembly myself, but another member, Nir Dary was kind enough to point out some good links: http://home.earthlink.net/~ksiders1/a8prog...tml#programming http://www.xmission.com/~trevin/atari/atari.html 'Hope this helps. Quote Link to comment Share on other sites More sharing options...
zraider Posted June 12, 2002 Share Posted June 12, 2002 This was a double entry. Quote Link to comment Share on other sites More sharing options...
Cybergoth Posted June 12, 2002 Share Posted June 12, 2002 Hi there! The Fridge is also worth visiting: http://www.ffd2.com/fridge/ There you find tons of 6502 assembly programms and techniques with sources and, more important an archive of the C64 online magazin 'C= Hacking'. I think in the first issues there was even an assembler course for beginners. Greetings, Manuel Quote Link to comment Share on other sites More sharing options...
Nukey Shay Posted June 12, 2002 Share Posted June 12, 2002 Great links!! Debro's second one is definately worth a look if you have trouble understanding what some opcodes do. Quote Link to comment Share on other sites More sharing options...
DanBoris Posted June 12, 2002 Share Posted June 12, 2002 You may also want to check out Machine Code Tutor for the Atari 8-bit computers. You can get it at: http://homepages.paradise.net.nz/atari/utils.html and run it on an emulator. I checked it out last night and it's a pretty good intereactive tutorial. Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.