Kyle22 Posted January 22, 2022 Share Posted January 22, 2022 What Doc said is a good place to start troubleshooting. Those SIO caps are MORE harm than good. Quote Link to comment Share on other sites More sharing options...
tsom Posted June 23, 2022 Share Posted June 23, 2022 I know it's been a while, but has any progress been made to this problem? I'm still seeing the issue on my 130xe and my FujiNet's (v1.0 and v1.3). Again, turning on the computer doesn't boot the FujiNet - something seems to be delaying the FujiNet from starting up in time for the 130xe to recognize it and boot off the device. If I add power to the FujiNet, so it's all booted up, (either an external cable, or the USB to my computer), since the it's already booted, it starts up just fine. If I don't have anything plugged into it, and once the XE comes up, I then type "BYE" to get to the system test, then hit Reset, I can get the FujiNet to boot. I tried my 800XL, and it does the same thing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.