tschak909 Posted January 6, 2022 Share Posted January 6, 2022 @jeffpiep successfully booted Total Replay v4 from a DigitalOcean server using the prototype #Apple2 #FujiNet which is connected to the #Apple2 plus via SmartPort! Yes, this is an Apple2 being booted from the internet. 11 Quote Link to comment Share on other sites More sharing options...
masteries Posted January 10, 2022 Share Posted January 10, 2022 (edited) Congratulations! A white box can be seen attached to the "SIO" port of Fujinet, Any details regarding physical interface for Apple 2? Edited January 10, 2022 by masteries Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted January 10, 2022 Share Posted January 10, 2022 looks like a sio breakout to wire it up to the apple smart port you see wire to the ribbon cable and the other device... 1 Quote Link to comment Share on other sites More sharing options...
tschak909 Posted January 10, 2022 Author Share Posted January 10, 2022 (edited) 3 hours ago, masteries said: Congratulations! A white box can be seen attached to the "SIO" port of Fujinet, Any details regarding physical interface for Apple 2? Since the firmware is in development, and there isn't a version of the FujiNet with a smartport, we have attached one of @mozzwald's SIO break-out boxes, that are commonly used for tapping with a logic analyzer. This is my setup here on a //c+ The firmware is in the 'iwm' branch of fujinet-platformio, and spsd.cpp contains the pin-out information: -Thom Edited January 10, 2022 by tschak909 2 Quote Link to comment Share on other sites More sharing options...
massiverobot Posted January 25, 2022 Share Posted January 25, 2022 And with @tschak909 and JeffP's copious help I got a IIc booting from FN! It's here for AppleIIs! If you are interested in helping bring the IIs to FN life come over to the discord and help bring this to completion and retail devices... 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.