mr-atari Posted May 15, 2005 Share Posted May 15, 2005 Hello all, Just to let you know that I'm online for remarks, questions and tips. http://www.atarimax.com/flashcart/forum/viewforum.php?f=7 Not only for MyIDE + flash, but also for general MyIDE-topics. See you! Sijmen. Quote Link to comment Share on other sites More sharing options...
Goochman Posted May 15, 2005 Share Posted May 15, 2005 Mr. Atari - Ive got a CompactFlash IDE hooked into my internal MyIDE board. I had some issues and am going to start from scratch again formatting it - Could you give me some suggestions on the best utility to use to start over again - Will the 'sector/head' utility report back correctly with regard to setting my sectors and such? Im also confused on where th 'disk imaging' should start???? Quote Link to comment Share on other sites More sharing options...
mr-atari Posted May 17, 2005 Author Share Posted May 17, 2005 >Ive got a CompactFlash IDE hooked into my internal MyIDE board. That is a great setup. >I had some issues and am going to start from scratch again formatting it - Could >you give me some suggestions on the best utility to use to start over again - Will >the 'sector/head' utility report back correctly with regard to setting my sectors >and such? Ok. best is to use Util32.ATR you can download from my site. Follow the quickguide for the 3.2F interface. This is a fast and clean setup. Images (or ATR's). Check the number of cylinders of your card reported by Fdisk. To enable images, you need 512 cylinders minimum. In this case cylinder 256-512 are reserved for images. Now, If you have gargabe on cylinder-0, forcing the OS to start the HD and crashing the system you need to do this: power up without CF-card. When running plugin the card (do not press reset) and run fdisk. Do a autodetect (if not asked) and save&exit. This will clear the bootarea of the card. Cheers, Sijmen. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.